Hawker Hunter EDF
#1
Member
Thread Starter
Join Date: Jun 2003
Location: Longfield, UNITED KINGDOM
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Hawker Hunter EDF
Hi Guys,
Anybody out there interested in an EDF Hawker Hunter.
I am in the final stages of completing this project for a well known UK kit manufacturer.
It's a CNC cut kit for Wemotec Mini Fan 480 and most motors from Speed 480 race up to hot brushless. The prototype flies with an Irvine 480 Cobalt 9T and either 8 or 10 CP1800's. This combination gives full scale performance with decent loops from level flight. Weight is around 1150gms.
The outline is very scale with only slight adjustments for ease of manufacture or better flight performance.
If there's interest I'll post pics.
Just let me know!!
Anybody out there interested in an EDF Hawker Hunter.
I am in the final stages of completing this project for a well known UK kit manufacturer.
It's a CNC cut kit for Wemotec Mini Fan 480 and most motors from Speed 480 race up to hot brushless. The prototype flies with an Irvine 480 Cobalt 9T and either 8 or 10 CP1800's. This combination gives full scale performance with decent loops from level flight. Weight is around 1150gms.
The outline is very scale with only slight adjustments for ease of manufacture or better flight performance.
If there's interest I'll post pics.
Just let me know!!