RCU Forums - Programming Hobby Lobby F-18

RCU Forums (https://www.rcuniverse.com/forum/)

- Electric RC Jets (https://www.rcuniverse.com/forum/electric-rc-jets-198/)

- - Programming Hobby Lobby F-18 (https://www.rcuniverse.com/forum/electric-rc-jets-198/11337547-programming-hobby-lobby-f-18-a.html)

CaptHal

12-19-2012 02:16 PM

Programming Hobby Lobby F-18

I didn't know where to put this so I put it here.

I have the Hobby Lobby F-18 with Thrust Vectoring.
I have programmed my JR 11x and it flies very well.
What I would like is to program the Thrust Vectoring to go on/off with a switch.
I could use either JR 11x or my Spektrum 8 Transmitters.

Thanks for any help.

evan-RCU

12-19-2012 02:25 PM

RE: Programming Hobby Lobby F-18

I used the programing that came in the instructions and it works well even though I had to adapt it to my 9503. I set balance at 3" and upped the elevator travel a bit. And got rid of the Deans connectors/ 3to 6S adapter. Changing the connectors changed from 65.8A and 1490W to 68.9 and 1583.5, 6% increase. There are big threads on this and the Eurofighter on RCG.

All times are GMT -8. The time now is 04:15 AM.