Hobby Lobby Cessna 172
#1
Junior Member
Thread Starter
Join Date: Oct 2005
Location: Topeka,
KS
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Hobby Lobby Cessna 172
This plane was just too good to say no, 44" wingspan, 26 oz. flying weight, All-Wood ARF aileron trainer. So it’s on the way. I think this plane is going to get a lot of fly time this summer. I ordered it with a “Nippy Black 1812/100” brushless motor. The motor is for a 32oz. plane or 26oz. for 3D planes so my Cessna should be over powered. That’s the way I like to fly my planes. Here’s the set-up I’m thinking.
Nippy Black 1812/100 brushless motor
ElectriFly SS-25 ESC
(4)Tower Pro 9gm Servos
1320, 1900, 2200 11.1v lipo packs
APC 9x6 Prop
Does anyone have this plane yet?
Kevin
Nippy Black 1812/100 brushless motor
ElectriFly SS-25 ESC
(4)Tower Pro 9gm Servos
1320, 1900, 2200 11.1v lipo packs
APC 9x6 Prop
Does anyone have this plane yet?
Kevin
#3
Junior Member
Thread Starter
Join Date: Oct 2005
Location: Topeka,
KS
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
RE: Hobby Lobby Cessna 172
I guess I’m a little “old school”. I like the balsa planes. I have a Slow Stick and an Estarter and there great planes. But I just like working and flying balsa planes. Plus I don’t crash very often at all. Knock on balsa…………………