Maruyama engines
 

Just picked up two Maruyama Blowers One unknown the other is marked BL4500 HA. Both appear to be in good shape. Anyone familiar with Maruyama? Good, bad or just ugly ? Thanks for your help

RE: Maruyama engines
 

Got a photo?

RE: Maruyama engines
 

I'll strip them down over the next couple of days & post some pictures. I've neve heard of Maruyama before, but then I'm just a beginner.

RE: Maruyama engines
 

Here's what I found from their web site.

Nashcat





BL4700HP 40.2cc,
BL4900HP 40.2cc,
BL560HP 48.6cc,
BL5700HP 48.6cc,
BL6900HP 59.2cc,
BLL2600 25.6cc,

RE: Maruyama engines
 

Interesting,, no BL4500. Must be an older model. I'll try to measure one today.

RE: Maruyama engines
 

What is the websites name?

RE: Maruyama engines
 

[link=http://www.maruyama-us.com/]Maruyama web site[/link]

Nashcat

RE: Maruyama engines
 

Antique
Wondering what your status is on this project?
Same model has shown up locally for sale, well used and missing carb. It has 2 ring piston, square finned head with 4 corner holes and recess in top fin for plug. If you have any more info I'm interested.

RE: Maruyama engines
 

These pics are on here somewhere but I'll post them again. They're really Kawasaki 40.2 cc.

RE: Maruyama engines
 

Antique
I also have one of these 40.2cc engines from a backpack blower. Engine has been pulled but no other action taken as yet. Interested in what you find this out about this conversion. Are you going to go ahead & complete the conversion & test? (I hope YES)
Sides7

RE: Maruyama engines
 

In a previous post RCIGN1 commented that these were good strong engines and nearly industructable but heavy. Looking at the engine I believe him. There is lots of metal to cut off but I'm still inclined to believe that the end product would be heavier than I'm interested in. Three of them on the shelf until I have nothing better to do. Mabey do some trading for something smaller, in the 22cc to 28cc range ???

RE: Maruyama engines
 

Sent an e-mail request for schematic and parts list via site's 'contact us' yesterday and they sent PFD files today. They do look heavy. I pass, thanks for the pics.

vintage Maruyama BL400 Blower motor looking for a Carb
 

Would anyone have or may know where I can get an used Carburetor for a vintage Maruyama BL400 leaf blower motor that I'm working on for project? Part # is 580466 I don't see any cross references but would love to nt by a new one a 100+ bucks Thank you in advance