RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Engine Conversions (https://www.rcuniverse.com/forum/engine-conversions-92/)
-   -   Brillelli 46 prop?? (https://www.rcuniverse.com/forum/engine-conversions-92/4470285-brillelli-46-prop.html)

deckerv 07-06-2006 02:45 PM

Brillelli 46 prop??
 
Just wondering what you fellas are running on your 46's?? Mine is in my Christen Eagle (GP). What are you running in yours? Also, my mid range is somewhat sloppy. I'm thinking the needles need adjusting a bit.. any good info on adjusting needles on gassers??
Thanks!!!!!
Deck

captinjohn 07-06-2006 03:02 PM

RE: Brillelli 46 prop??
 
Not sure but the use of a higher pitch prop may help midrange. Not enough load in mid-range with a low pitch? Well its something to try. Capt,n

deckerv 07-06-2006 03:23 PM

RE: Brillelli 46 prop??
 
Thanks for the suggestion.. I'll have to give that a whirl.

Also.. since this engine has a built in pump, would it be best to fill it via a 3rd line like I have right now, or would it matter if I did it off of a T fitting on the fuelline to the carb? I wasn't sure if it would flood the engine or not.

Antique 07-06-2006 03:58 PM

RE: Brillelli 46 prop??
 
The carb has a one way inlet needle in it, there's no way to flood the engine by fueling through the line from the tank with a T fitting..Make sure the T is completely sealed after fueling....

deckerv 07-10-2006 11:53 AM

RE: Brillelli 46 prop??
 
Thanks!!!!!!!!!!!!!! I thought so, but was not 100% sure..

3DMonstr 05-25-2008 09:42 AM

RE: Brillelli 46 prop??
 
A good prop for the Brillelli 46 gt is the 20x10 Mejlik. Excellent pull and speed up to about a 15 pound plane.


All times are GMT -8. The time now is 07:48 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.