I Need Machine Work
 

Any volunteers?

I have a short block Poulan 35cc engine and I need it converted. I have a fixed timing C&H unit for it. I have an assortment of Walbro and Zama carbs for it.

Just need someone to make a prop hub, press in a magnet, hall switch and bracket, engine mount and a carb adapter. It looks to me like a guy could use an aluminum beam mount. It has threads in the cylinder for the carb, so it shouldn't be too hard to mount a piece of aluminum and then tap it for a Walbro carb.

PM me if you are interested. Thanks very much.

RE: I Need Machine Work
 

I already have the parts made for those engines , they are on my website

RE: I Need Machine Work
 

I don't see a thing on your website that indicates you have specific parts for my engine. Could you send me a price list? I'm ready to get this one converted now and have it flying before spring.

RE: I Need Machine Work
 

Ken I saw your post on the other forum regarding mufflers. Glad to see you are still making them. I will be needing a few in the not too distant future.

RE: I Need Machine Work
 

just let me know

Rc pilot
muffler /prophub with mag/ sensor bracket with spacers/ carb adapter that turns the carb/ hanger nine mounts/ rail mounts to mount to the hanger9 mounts/ $ 135.00 shipped
I will need to know the thread pitch on the crank I have ran into a couple different treads and the bolt spaceing for the crank cover plate. or a pic of the bottom they make a couple different ones or if you send the engine and ignition for 45.00 it will be ready to mount and run.
I did turn off the sale page on my site and forgot I didn't turn it back on yet sorry about that.

RE: I Need Machine Work
 

Here's a few more pics.

If it's that easy, I'll just send it to ya Ken. I have the original carb mount now. Bought it on ebay last night. Don't know if you need or want that.

RE: I Need Machine Work
 

Ok you will need to send it to

Kenneth Lambert
Po Box 94
Duson,LA 70529

This is a temp address until my wifes contract expires . I get several orders and such then come home and get them done up and some spares made .It shoulden't take long cause I already have a stock of most the parts in my trailer I pull for the planes.

Please send priority mail Ups will require another address thanks

RE: I Need Machine Work
 

Well, another winning bid on ebay and I'm now the proud owner of twins.:D

Yup!! I got 2 identical Craftsman/Poulan 2.2 cubic inch engines. Ahhhhhhhhhhh--what to do--what to do?

I'm thinking BIG twin. [sm=lol.gif] Anyone got any ideas?

RE: I Need Machine Work
 

here are some pics of my parts , the carb adapter turns the carb for straight hookup. If I knew you were wanting the stock mount I have a box full of those.