RCU Forums - Moki 1.8 conversion

RCU Forums (https://www.rcuniverse.com/forum/)

- Engine Conversions (https://www.rcuniverse.com/forum/engine-conversions-92/)

- - Moki 1.8 conversion (https://www.rcuniverse.com/forum/engine-conversions-92/6547094-moki-1-8-conversion.html)

bigbuster

10-27-2007 06:56 PM

Moki 1.8 conversion

Could someone tell me if the moki 1.8 can be converted to gas and what parts I need.

Thanks
Jeff

oldtimer2

10-27-2007 08:10 PM

RE: Moki 1.8 conversion

Yes, Email [email protected], they do mods for moki & ST

oldtimer2

10-28-2007 05:06 PM

RE: Moki 1.8 conversion

Greater southwest aero modelers Has a tech article on converting a Moki 210, thr 180 should be about the same.

tkg	10-28-2007 07:48 PM

RE: Moki 1.8 conversion

IF you want to run gas, buy a gas engine.
If you must Ch has the parts to convert a Moki. Its simplest to run 10% oil mix.
To run needle bearings on a Moki is a major conversion. You can't sleve the crank pin, because its hollow and will be to thin after grinding. So you have to machine off the crank pin and then press in a hardend pin.

All times are GMT -8. The time now is 08:35 PM.