Prop adapter for Homelite
 

Can anyone help, I am new to lathe work and would like to know how I get the gripping teeth on the part that the prop backs onto, this would also cover the prop washer. Thanks, Joe

RE: Prop adapter for Homelite
 

http://www.technologystudent.com/equip1/knurl1.htm

RE: Prop adapter for Homelite
 

Da javue all over again

RE: Prop adapter for Homelite
 

that link realy doesnt apply to face knurling. i have a single knurling wheel where i work and im going to catch the outermost part of my custom hub and hopefully it will work. its hard to knurl the face of things due to tat the part is travelling at different speeds across the face.

RE: Prop adapter for Homelite
 

What i do is back the knurler from the piece and move it to a new spot and start over.You dont want to have the knurler running against the piece and then using the slide move it.That would cause the tool to dig in wouldnt it?

RE: Prop adapter for Homelite
 

probably. but i dont personally think that the entire thing needs to be knurled anyway. imho i think 6 bolts is better and cooler looking haha

RE: Prop adapter for Homelite
 

Like this one i did?