Davis conversion head question
 

I just put the conversion head on, and I was surprised to find the original head screws wouldn't turn in all the way. This left the head loose.

True, I could shorten the screws. But I took a good look at the head and can see the screw holes are counterbored so there's only about 1/32" of meat left on the head at the bottom where it mates with the block. Is this right - or were the headbolt holes counterbored too deep?

I'm trying to get in touch with Bob but the website isn't working for me at the moment.

Engine is an OS 46 LA

Tnx for any input -

Lee

RE: Davis conversion head question
 

Call him on the phone 203-877-1670 in the AM after 9AM martin

RE: Davis conversion head question
 

Call him on the phone 203-877-1670 in the AM after 9AM (3 hour time lag 12 noon your time) martin

RE: Davis conversion head question
 

That's back wards. Call him at 6am, that's 9am his time, or you could just call him before 2pm.
You may not be up at 6am.

RE: Davis conversion head question
 

WOW sure got that backwards thanks for the correction must be too used to calling the west coast from here (florida) and then again
5 hrs the other way when calling the UK martin

RE: Davis conversion head question
 

Talked to Bob today - head is indeed defective and replacement on the way.

-Lee

RE: Davis conversion head question
 

Super--- guess a miss calc on the CNC programing. good luck with the new one martin

RE: Davis conversion head question
 

This fellow was willing to admit the mistake and fix it? Wow, he's going to make "Made in America" mean something again! Errors happen, but good customer service is invaluable. Go Davis Diesel!

Kevin

RE: Davis conversion head question
 

Theres one thing about DDD. He's a square shooter.
And he knows why he believes what he knows.

Oh that's 2 things

RE: Davis conversion head question
 

Bob Davis is a quality fanatic pretty sure he was upset with this one getting out the door. Knowing Bob quite sure the machinest heard about this one. martin