eagle 50 helicopter
can some tell me if the honeybee king has interchangable parts with the eagle 50
|
RE: eagle 50 helicopter
for the most part the answer is no.
|
RE: eagle 50 helicopter
has anyone had trouble with the reciever on the eagle 50
|
RE: eagle 50 helicopter
every reciever i have got was burnt and will not work
|
RE: eagle 50 helicopter
did you crash your heli blocked your blades?
Andy |
RE: eagle 50 helicopter
i crashed mine and the blades did get stuck and my receiver did stop working the motor got so hot that the soldering melted on the main motor.
|
RE: eagle 50 helicopter
sounds like the eagle 50 has "issues" ?
|
RE: eagle 50 helicopter
there was an issue with the motor's decal covering one of the holes but that has been taken care of.
Andy |
RE: eagle 50 helicopter
I have a eagle 50 and I find that the Ventom Nightranger 3D have the same parts, as well as the Walkera Dragon Fly H22E
|
RE: eagle 50 helicopter
yes they have the same parts
Andy |
RE: eagle 50 helicopter
If you're prone to crashing & worried about burning out motors or receivers, simply solder a 5 amp automotive fuse in-line on the main & tail motors' red wire. Bettr to blow out a fuse upon crash or blocked blade, then to burn up parts.
|
RE: eagle 50 helicopter
I just got the New Eagle 50 3D, I want to fly on a simulator first but the radio that came with it only has a serial connection and it is loose on the radio. any ideas as to how or where to pick up a connection for it that is usb?
|
RE: eagle 50 helicopter
if you are spending money to get a USB to serial adapter why not get a USB simlulator for $19.95.
Andy ORIGINAL: jtk I just got the New Eagle 50 3D, I want to fly on a simulator first but the radio that came with it only has a serial connection and it is loose on the radio. any ideas as to how or where to pick up a connection for it that is usb? |
RE: eagle 50 helicopter
I have the $19.00 simumator but it is a 4 channel I wish to use my 6 CH. if I need to bye a differant 6 Ch radio that will work on the eagle 50 3d that has a USB consection I could do that with the 6ch sim program but not sure what would work with the plane
|
RE: eagle 50 helicopter
1 you havew to install the fuses or you'll keep burning the receiver out
2 the esky toy transmitter works fir 6 ch helis -whats the difference from a 6ch radio besides the pit.plt knobs??? 3 Get the clearview simulator and use the esky toy trans -awesome sim and no burning batteries -the usb cable won't work on a lot of trans |
RE: eagle 50 helicopter
I purchased an Eagle 50 from XHeli. Plugged in the battery and released the smoke. I initially contacted Xheli and was shuffled to Raidentech, who is apparently the parent company. I have contacted Raidentech with several e-mails asking for a RMA. I'm just getting a runaround. They have no interest in supporting this product. The stock reply is, "We will send you an RMA ASAP." Then I wait. I wait some more, and I send another e-mail. I was told to contact a phone number that is eternally busy ... most likely off the hook. I send additional e-mails asking why they don't just send the RMA instead of promising to do so? No reply. Figures.
So, I reckon I'm stuck with it. Anyone have any suggestions for upgrading to a 2.4 system? I won't send another dime for any product offered by Raidentech. I've got a Spectrum D6i, so I'd like to keep it in the Spectrum genre of products. Can't seem to find any mixer that will work. Don |
RE: eagle 50 helicopter
yeah ive had a similiar problem with raidentech, although not related to the eagle 50 which i also own and hate constantly needing to replace parts.
basically ordered a few 3 channel helis from raidentech.. the shipping is ridiculously priced. they really should use fedex which charges 30% cheaper than ups.... on top of thier bad service. no reply.. one of my helis came with no TX ... its a channel rtf pixy and i ordered 2 one had a tx one didn't. i contacted them finally and they said what freq is it and they will send it out.. after giving them all my info and they said they would send it to me.. its been two months already and no TX in the mail. they keep repeating themselves like a robot answering machine when i send email, so screw them they get a bad buisness rating and have been reported to the better business bureau .. |
RE: eagle 50 helicopter
But i did have an actual question if anyone can help , i need to find shcematics on the eagle 50 so i can put it back together.. the right way .lol..
i know it might be simple but its my first time rebuilding a collective pitch and i want to do it right. any help would be appreciated thanks. |
RE: eagle 50 helicopter
Here is the link for the eagle 50. Good luck putting it together.
[link=http://site.exceedrc.com/resource/product/eagle50-ex.jpg]http://site.exceedrc.com/resource/product/eagle50-ex.jpg[/link] |
RE: eagle 50 helicopter
Does anybody know how to get more than three flights out of an eagle 50 without having to replace the main motor? I am past my 30 day warranty so it doesnt matter what happened my supplier will not warranty the motor. The brush holder fell off yes fell off inside the motor. I guess i need to cut the blades down to 5 inches each, maybee this will help. Fed up with this.
|
RE: eagle 50 helicopter
if you didn't have any crashed at all then motor will last more than 3 flight and I can guaranty it because I've flown the eagle50 personally. what's your order number I'll warranty 1 motor for you.
Andy |
RE: eagle 50 helicopter
is there a step by step tear down of this heli? i bought mine used and i didnt get any paper work with it...
thanks, sea |
RE: eagle 50 helicopter
http://site.exceedrc.com/resource/pr...eagle50-ex.jpg
Andy ORIGINAL: SeaWolf316 is there a step by step tear down of this heli? i bought mine used and i didnt get any paper work with it... thanks, sea |
RE: eagle 50 helicopter
i thank you for the help, but what i mean is almost like a step by step as if i was building it from kit form.
i am also after a better exploded view of the head on it as well.. thanks, sea |
RE: eagle 50 helicopter
just got my eagle 50 and after 5 minites the main motor fried, is this a problem with this heli.
|
All times are GMT -8. The time now is 12:41 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.