G2 Transmitter
 

I'm having issues with my WK0701 transmitter. After I turn on the power the "wer" half of "power" just flashes. I have replaced the batteries and tested the voltage to the transmitter from the battery pack. I have also made sure the "flight mode" switch is set to "normal". Has anyone else had this problem and can you tell me what the problem is? Thanks!!

RE: G2 Transmitter
 

the color should be purple. Once you turn on the TX it will flash couple time and stay solid purple.

Let me know

Andy

RE: G2 Transmitter
 

When I first received the transmitter it worked fine and worked just like you said it should. Now it goes through the start up and then the right half of "power" keeps flashing.

Thanks, Lynn

RE: G2 Transmitter
 

make sure your setting are as follow: 2, 4, 6, 7 are ON and rest are off.

Let me know

Andy

RE: G2 Transmitter
 

I double checked the settings and all were ok. Still getting the same thing.
I have a feeling the transmitter took a "dump" on me.

Thanks, Lynn

RE: G2 Transmitter
 

alright I can exchange you another TX. This doesn't happen often. what's your order number and I'll issue RMA.

Andy

RE: G2 Transmitter
 

I ordered this from Nitroplanes and I am not sure if I still have the order info.

Thanks for your help.

Lynn

RE: G2 Transmitter
 

It doesn't matter I can still help. Let me know the order number. If you don't know you can PM me your full name and address.

Andy