new speeder
#1

Thread Starter
Join Date: Dec 2002
Location: Konz, Germany, GERMANY
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts

Hello speed friends,
here are some pictures of my new speed project.
A model with 2m span and 2m length, designed for up to 30 S LiPo with an APD regulator 20-300 HV and a Scorpion Powercroco 5050 motor , good for 20 KW. 100 % CFK
At the same time the 4.2 kg model flies with a Jet Cat 180 NX turbine and 3 liters of petroleum.
Have fun
Regards Michael











here are some pictures of my new speed project.
A model with 2m span and 2m length, designed for up to 30 S LiPo with an APD regulator 20-300 HV and a Scorpion Powercroco 5050 motor , good for 20 KW. 100 % CFK
At the same time the 4.2 kg model flies with a Jet Cat 180 NX turbine and 3 liters of petroleum.
Have fun
Regards Michael











Last edited by f3d; 06-14-2020 at 08:28 AM.
#9
Junior Member
Join Date: Aug 2021
Location: RTP, North Carolina
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
#10
Junior Member
Join Date: Aug 2021
Location: RTP, North Carolina
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts



Update my winds and castle inverters are running more efficiently than Powercrocos 5040 speeds and YGE . My Eta is 96.14% My engine is only 448 grams and will peak 13 Kw .
U know me. He winds the old way I wind the new....

"I stall = working voltage / internal resistance
for 35V = 12500A
for 40.38V = 14421A
eta max according to the formula also used by ChristianL in the LMT thread (with the measured 2.8mOhm internal resistance):
calculated with 8.7A no-load current at 40.38 V = 95.1%."
~powercroco~
Regards,
Hubert

Last edited by Clugh; 05-13-2022 at 05:28 AM.