juno rc f-20 tiger shark
i just recived a juno rc f-20 tiger shark and from what i can see the spars are balsa i do not see any hard wood for them can some one help.[sm=spinnyeyes.gif][sm=spinnyeyes.gif]
|
RE: juno rc f-20 tiger shark
If you're talking about wing spars, there should be any because it's foam core with balsa sheeting.
|
RE: juno rc f-20 tiger shark
1 Attachment(s)
my juno rc f-20 is a built up wing.
revver bro #174 |
RE: juno rc f-20 tiger shark
Dragonfly,
What you have is correct. The spars are balsa. No need for hardwood. However, as stated in the instructions...............glass the center section with 6 oz. cloth and resin. I like Z-poxy b/c is sands so easily, but you can use whatever you need. Setxws6, The Juno R/C kit has no foam. Perhaps you are thinking of the old DC kit (ARC version) which did have a foam wing. |
RE: juno rc f-20 tiger shark
thanks dk823
|
RE: juno rc f-20 tiger shark
[:'(] euuuuugh, another reason I'm sad to see the SA F-20 go away....
|
RE: juno rc f-20 tiger shark
Will an K&B .61 fit in the plane or is it to big...
|
RE: juno rc f-20 tiger shark
Dragonfly,
Looks like you have the trailing edge shim in backwards. You're building wash in instead of washout. I built one of these last year and found the directions are wrong. I told Juno and he knows about the problem. Change it if you can before you finish. |
RE: juno rc f-20 tiger shark
I dont think its going to matter anyway the guy who gave me the kit lost some very important stuff out of the kit. most of the formers for the fuse. i am missing about 8 formers i am going to see if i can cut them out but i have not had sucsses in the past with cuutting parts from scratch.
|
RE: juno rc f-20 tiger shark
Dragonfly,
Send me a PM with the formers you are missing. I can supply you with them. Derek Staha Juno R/C |
RE: juno rc f-20 tiger shark
John D,
The engine compartment is approximately 3-5/8 x 2-1/2 x 2 (lengthxwidthxheight). Does this help? Derek Staha Juno R/C |
RE: juno rc f-20 tiger shark
Derek, It looks like it will fit, Fixin to order one from you. Thanks, John D...
|
All times are GMT -8. The time now is 08:38 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.