HACKER E3-37..!
01-10-2005 | 06:48 PM
#1
Thread Starter
Junior Member
Joined: Jan 2005
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
From: culiacan,
WY, MEXICO
HACKER E3-37..!
HI GUYS:
what can you tell me about this motor
i want to set it in my E-Flite ultimate that it´s around 14 oz.
my speed control is the phoenix-25.. and my batteries are TP 3s 2100 mAh and they are 4.6oz... do you think this combo is ok for 3D performance..?
what prop should i use..? maybe 10*4.7 or 11*4.7
any Suggest or ideas to improve my set up, will be nice
what can you tell me about this motor
i want to set it in my E-Flite ultimate that it´s around 14 oz.
my speed control is the phoenix-25.. and my batteries are TP 3s 2100 mAh and they are 4.6oz... do you think this combo is ok for 3D performance..?
what prop should i use..? maybe 10*4.7 or 11*4.7
any Suggest or ideas to improve my set up, will be nice
01-12-2005 | 07:00 PM
#2
Senior Member
Joined: Jan 2005
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
From: Midvale, UT
RE: HACKER E3-37..!
I've tried the Hacker 3700 in the E-flite Ultimate and it does great. I used the Himax Gearbox with the 5.33:1 gear ratio and a 11x4.7 propeller. The plane had a lot of power and it hovered with ease. Plenty of pull out as well. I use the 3 cell 860 on my Ultimate and it came in about 11-12oz. Try the gear ratio and see if you like the proformance. Happy flying.
Bevo
Bevo
