Volcano EPX Pro issue
Hello,
I have a Redcat Volcano EPX Pro with the stock Redcat Radio system, a Hobbywing wp-s10e-rtr esc, and redcat 3300kv brushless motor. I bought two Venom 5200mah 35c 7.4v LiPo batteries and the truck ran fine for about half an hour. The motor will no longer turn and the steering no longer works. The ESC turns on and beeps for about 2 seconds then stops. I tried putting another battery on it that was fully charged and it still did the same thing, I also checked all the gearing and nothing was stripped. I would appreciate some help guys; thanks much. Mike. |
I know this is a very old post. But, sounds to me like the ESC either lost its programming, or went out completely. Try reprogramming the ESC. But, since this was posted last June, I'm betting this issue was resolved already.
|
Originally Posted by Spartan82455
(Post 11831654)
Hello,
I have a Redcat Volcano EPX Pro with the stock Redcat Radio system, a Hobbywing wp-s10e-rtr esc, and redcat 3300kv brushless motor. I bought two Venom 5200mah 35c 7.4v LiPo batteries and the truck ran fine for about half an hour. The motor will no longer turn and the steering no longer works. The ESC turns on and beeps for about 2 seconds then stops. I tried putting another battery on it that was fully charged and it still did the same thing, I also checked all the gearing and nothing was stripped. I would appreciate some help guys; thanks much. Mike. :rolleyes: Got ANY clue what FULL SCALE means ? |
All times are GMT -8. The time now is 06:47 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.