LD Dial Polarity on 8FGS
 

The Digital controls LD & RD have a preset polarity (that's what I call it) that from center at 0 percent. Turning the knob counterclockwise provides up to +100% control signal and turning it Clockwise provides a -100% control signal. The knob is used to change the gain on an Eagle Tree Guardian not a flight control surface. The CCW-CW makes the control counter-intuitive. Gain is increased turning the knob CCW and reduced turning it CW. Is there a way to reverse the equivalent "throw" from center (0) to CCW -> -100 and CW -> +100?

You can reverse them by reversing the channel they control. That should reverse how they apply.