RCU Forums - Program dual elevators

RCU Forums (https://www.rcuniverse.com/forum/)

- Futaba Radios Direct support forum (https://www.rcuniverse.com/forum/futaba-radios-direct-support-forum-125/)

- - Program dual elevators (https://www.rcuniverse.com/forum/futaba-radios-direct-support-forum-125/11623461-program-dual-elevators.html)

ultra6a

11-08-2015 10:45 AM

Program dual elevators

How do I program dual elevators on a Futaba 10c using a 6 channel receiver?
I have the tried setting up a Pmix with the second elevator plugged into channel 5 but can not get to work.

Bax	11-09-2015 07:51 AM

What's wrong? You'll want the make elevator master and channel 5 as slave. Then set the two rates as needed.

What is your setup of the p-mix, and what are the values? What is actually happening?

ultra6a

11-09-2015 10:22 AM

Thanks Bill,

I finally figured it out last night. I had the p-mix setup correctly, but did not have the rates for channel 5 set correctly.

All times are GMT -8. The time now is 01:10 AM.