14 MZ Elevon Function
 

Am I missing something here? I'm trying to set up a flying wing and there is no Elevon Function. I chose wing type flying wing which gives me Aileron 1 and Aileron 2. The elevator throw seems to be fixed at 50% of the aileron throw and I can't find a way to change it. Since I've chosen the flying wing planform, when I go to the ATV screen, there is no elevator adjustment. My 9Z and 9C both have the elevon function which has this capabiltiy, what am I missing?

Any suggestions appreciated,

Azarr

RE: 14 MZ Elevon Function
 

You dont set it via the ATV setting. The ATV's are for servo outputs. Go to the AFR setting and there is an Elevator setting there.

Regards, Guy

RE: 14 MZ Elevon Function
 

Thanks Guy,

For some reason that didn't occur to me. I'll try it later today.

Azarr

RE: 14 MZ Elevon Function
 

I am really aware of that type thing now. I have a Q500 that I race and after setting it up in the new radio I went to the servo page and noticed that one of the two tail servos was moving more than the other. It dawned on me that when I originally set it up on my 9Z I wanted to decrease the elevator travel....I had done it on the wrong page....D'OH!!!

Regards, Guy