RCU Forums - 9ZAHWCII elevator gimball problem

RCU Forums (https://www.rcuniverse.com/forum/)

- Futaba Radios Direct support forum (https://www.rcuniverse.com/forum/futaba-radios-direct-support-forum-125/)

- - 9ZAHWCII elevator gimball problem (https://www.rcuniverse.com/forum/futaba-radios-direct-support-forum-125/4687060-9zahwcii-elevator-gimball-problem.html)

mrdakota

08-29-2006 08:53 PM

9ZAHWCII elevator gimball problem

I finally discovered the issue I was having with my elev. channel. It seems that if I hold that gimbal down after 5-10 second long, I start to get chatter and glitching on any channel mixed to that input.
This is a new one for me.
Thoughts?

Bax	08-30-2006 04:28 PM

RE: 9ZAHWCII elevator gimball problem

Sounds like you may have a bad stick potentiometer. The transmitter should be sent for service to have it replaced.

All times are GMT -8. The time now is 02:30 PM.