Logic Switch Functions
 

I’m planning on upgrading from my 9C Super so I’ve been reading some manuals and I’m a little confused by the logic switch functions in the 12Z and 12FG. The transmitter comparison chart says that the 12Z supports logic switches and that the 12FG doesn’t, but when I look in the two manuals I find a reference to logic switches in the FG’s manual (last page) and not in the 12Z’s manual. Also, neither manual says anything at all about logic switching in the Switch Selection section. Can you please clarify which radio allows the use of logic switches and how you actually get to the logic screen.
Thanks a lot.
NormS

RE: Logic Switch Functions
 

Hi Norm,

When I did the Comparison chart for the 12FG there was not going to be Logic Switches. This is why it does not state this, I understand that as soon as I get some extra time, I need to get this updated.

All three radio's now have Logic switches due to the updates available on our website. If you do not find information on the logic switches in the manual, then it is best to look at the PDF of the changes made for each update.

When you go into any PMIX, you will be given a "switch selection" page, this is where you will select whether or not you are going to use a Logic Switch.


Sincerely,
Krysta
Product Development & Support Specialist
Futaba Service Center USA
[email protected]

RE: Logic Switch Functions
 

Excellent!
The 12FG is looking better and better.
Thank you very much for the info.
NormS