RCS 1000 module
#1
Thread Starter
My Feedback: (10)
Join Date: Jul 2003
Location: StaynerOntario, CANADA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
RCS 1000 module
Does anyone have a RCS 1000 ignition module they can tell me what wires are attached where on the 10 pin block on the side of this module. There should be some wires coming from the hall effect sensor that's screwed into the crankcase block of the motor going to the 10 pin block of the module. Colour and where the wires pin into the block is what I'm after to make up my own harnesses. Pictures would also be helpful if you have a RCS motor using the 1000 module. Thanks in advance.