DA 50 mount bolt pattern
11-25-2003, 12:17 AM
#1
Thread Starter
Join Date: Mar 2002
Location: OR
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
DA 50 mount bolt pattern
I am starting to build a Lanier CAP 232 kit using a DA50 eng. I do not have the engine yet but want to start building. The other day I looked on the DA site and they showed all of the deminsions needed. Tonight when I went back to verify the mount bolt/standoff pattern there is no front view showing!. Does anyone have these diminsions?. Also would like to know the outside diameter of the standoff's at the firewall ends. Also are the threads 1/4" std?.
Thank's
Ray
Thank's
Ray
11-30-2003, 12:09 PM
#2
My Feedback: (38)
RE: DA 50 mount bolt pattern
Rick:
Width for the center of the standoffs is 3 1/8 inches
Height is 2 5/8 inches
The diameter of the standoffs at the firewall is 11/16"
The standoffs are 2 1/2" long
The engine is 3 3/4 inches long for a total length from firewall to hub of 6 1/4 inches
The standoff at the firewall does take a standard thread 1/4" bolt
Hope this helps and matches the figures on DA's website. I took it right off a model in progress.
Paul Eago
Width for the center of the standoffs is 3 1/8 inches
Height is 2 5/8 inches
The diameter of the standoffs at the firewall is 11/16"
The standoffs are 2 1/2" long
The engine is 3 3/4 inches long for a total length from firewall to hub of 6 1/4 inches
The standoff at the firewall does take a standard thread 1/4" bolt
Hope this helps and matches the figures on DA's website. I took it right off a model in progress.
Paul Eago
12-01-2003, 08:53 PM
#3
My Feedback: (2)
Join Date: Oct 2003
Location: W BABYLON,
NY
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
RE: DA 50 mount bolt pattern
Hey Ray how long since you ordered you DA50? I ordered mine direct 2 weeks ago and they said 2 to 4 before shipping. My guess its gonna be a long time.
