CH Ignitions
08-04-2010, 11:23 PM
#6
RE: CH Ignitions
I know that most people who fly RC model gas engines do not know this but bill is the pioneer of RC ignitions for RC gas engines, I am sure that somewhere along the line somebody else might have done it but he was the first, A few years back if you flew a RC gas engine it had his ignition on it.
It is so good that one of the best ignitions out of China is manufactured form it.
I have converted a lot of chain saw engine in the past as well as others using his ignition and never had a problem with them,
I do not know how bad his health is but Bill here is hopping a speedy recovery and hope you have long time to enjoy the later years in your life.
Milton
It is so good that one of the best ignitions out of China is manufactured form it.
I have converted a lot of chain saw engine in the past as well as others using his ignition and never had a problem with them,
I do not know how bad his health is but Bill here is hopping a speedy recovery and hope you have long time to enjoy the later years in your life.
Milton
08-05-2010, 09:08 AM
#7
RE: CH Ignitions
I sent Bill a Get well card through the regular postal mail, but have not seen a posting or anything on how he is doing.
Bill if you read this ..no need to reply...we just want you to get well. I & Dawn do pray for you & others on a regular basis. I hope many reading this will pray for you too. I have personally seen it help a lot of the time. Sometimes we got to put things like this before our Hobby.
Will be doing just that. Capt,n
Bill if you read this ..no need to reply...we just want you to get well. I & Dawn do pray for you & others on a regular basis. I hope many reading this will pray for you too. I have personally seen it help a lot of the time. Sometimes we got to put things like this before our Hobby.
Will be doing just that. Capt,n
08-05-2010, 09:23 AM
#8
My Feedback: (2)
Join Date: Dec 2007
Location: Fort McMurray,
AB, CANADA
Posts: 4,119
Received 0 Likes
on
0 Posts
RE: CH Ignitions
John I had and have been rather concerned. I last chatted online with Bill on July 16th on the other forum and his last post was on the 17th. It sounded like he was having a hard time bouncing back after the operation and was worsening. I sure hope he will be OK. Like Jim said they make them farm boys pretty tough.
08-06-2010, 07:53 AM
#12
RE: CH Ignitions
May the good Lord continue to bless you and grant you a full and speedy recovery Bill, as with HIM all things are possible. All the best to you and yours.
Karol
Karol
08-08-2010, 11:20 AM
#15
Senior Member
RE: CH Ignitions
Hi Bill, You have touched my life in a very meaningful way and I am very greatful. Your kindness and generousity are well known on this board and others. Know that my prayers are with you and your family and as Karol mentioned above, Through HIM all things are possible.
Butch (AKA Jesse)
Butch (AKA Jesse)
08-18-2010, 07:31 PM
#16
Join Date: Aug 2002
Location: Springfield, Oregon
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
RE: CH Ignitions
You're one of the best Bill! All of your friends over here in Sheridan have got you in our prayers and are flying a bunch of flights for you... get better soon. And all these guys are right, we Wyoming guys can be pretty tough son of a guns 
08-20-2010, 02:43 AM
#17
My Feedback: (9)
Join Date: Jul 2003
Location: Pullman,
WA
Posts: 2,221
Likes: 0
Received 0 Likes
on
0 Posts
RE: CH Ignitions
Bill,
Best of luck with your current health issue. You've been a real asset to this hobby and are a great person to boot. Know that you and yours are in our prayers and thoughts. All the best,
Sam
Best of luck with your current health issue. You've been a real asset to this hobby and are a great person to boot. Know that you and yours are in our prayers and thoughts. All the best,
Sam
08-20-2010, 10:23 PM
#18
RE: CH Ignitions
Bill posted this on FG
Copy and paste
\I am home now,going about 10 %.
I had to let TKG go could not pay him.He is working a couple hours a day doing repairs and warranties.I am thankful for that.
At this time it looks like C&H is gone for ever.I say this with tears in my eyes and a heavy heart.
I am sorry for any problem this may cause anyone.If you have a Ign that needs serviced or repaired
Just buy a RCEXL Ign probably from Jody at Valley view.
Same circuit as my Ignition but I no a few things to make it better.
Thank everyone for there thoughts a prayers.
As Ever BCCHI
Copy and paste
\I am home now,going about 10 %.
I had to let TKG go could not pay him.He is working a couple hours a day doing repairs and warranties.I am thankful for that.
At this time it looks like C&H is gone for ever.I say this with tears in my eyes and a heavy heart.
I am sorry for any problem this may cause anyone.If you have a Ign that needs serviced or repaired
Just buy a RCEXL Ign probably from Jody at Valley view.
Same circuit as my Ignition but I no a few things to make it better.
Thank everyone for there thoughts a prayers.
As Ever BCCHI
08-21-2010, 07:39 AM
#20
RE: CH Ignitions
Great that Bill is home and hopefully is on the mend. Really very sad new about the possible demise of CH. It would be great if someone stepped up to keep this great business venture alive, with Bill's blessings of course.
Karol
Karol
08-21-2010, 10:31 PM
#23
RE: CH Ignitions
I wonder if FMA Direct company would be interested in taking over the CH brand of ignition systems. FMAcan doa lot with electronics. This would be with Bills consent only. I think we all should put on our thinking "hats" and try to at least suggest any info that may help this dilemma.
I am sure there is a couple of guys that could take over a good business of making and selling top notch ignitions like BCCHI did. Please do not take my thoughts the wrong way....just want to help out Bill. Hey...maybe FMA could get with Jody and then Jody could sell FMA chargers ect & ignitions like the good ones Bill made. Jody could install the ignitions too, that FMA made. Well just a idea anyway. Best Regards Capt,n
I am sure there is a couple of guys that could take over a good business of making and selling top notch ignitions like BCCHI did. Please do not take my thoughts the wrong way....just want to help out Bill. Hey...maybe FMA could get with Jody and then Jody could sell FMA chargers ect & ignitions like the good ones Bill made. Jody could install the ignitions too, that FMA made. Well just a idea anyway. Best Regards Capt,n
08-21-2010, 10:32 PM
#24
My Feedback: (1)
Join Date: Jan 2002
Location: Riverton,
WY
Posts: 3,114
Likes: 0
Received 0 Likes
on
0 Posts
RE: CH Ignitions
Instead of a perfect world where the plan was to do just what Pe suggested. This year has been a perfect storm of complications and bad timing.
Not anybodies fault, but it just is.
Not anybodies fault, but it just is.
08-21-2010, 11:37 PM
#25
Senior Member
My Feedback: (1)
RE: CH Ignitions
Terry,
Do you have the time or inclination to do some repair work? For compensation of course. I've been meaning to send you an e-mail a couple weeks ago but things kept getting in the way.
Bill,
CH is not nearly as important as you are. You've had a pretty rough time of things and I'd rather see you be healthy that be worring about ignitions. Get well buddy.
Do you have the time or inclination to do some repair work? For compensation of course. I've been meaning to send you an e-mail a couple weeks ago but things kept getting in the way.
Bill,
CH is not nearly as important as you are. You've had a pretty rough time of things and I'd rather see you be healthy that be worring about ignitions. Get well buddy.
