Zenoah Drill Jig?
Does anyone make a drill jig for a G-45?
Thanks, Tony |
RE: Zenoah Drill Jig?
Why would you need a drill jig for a G45 as it has a single bolt prop hub, at least mine does.
Karol |
RE: Zenoah Drill Jig?
The new ones have the single bolt and 2 pins in the hub.
|
RE: Zenoah Drill Jig?
I just pull the pins. These pins have been around for a very long time.
|
RE: Zenoah Drill Jig?
ORIGINAL: blikseme300 I just pull the pins. These pins have been around for a very long time. |
RE: Zenoah Drill Jig?
I just imprinted the pins in the back of the prop and then drilled the prop partially just enough to have room for the pins.
|
RE: Zenoah Drill Jig?
So a person could say maybe the pins are there to help keep the prop from slipping. Right? Capt,n
|
RE: Zenoah Drill Jig?
For people who don't tighten the single bolt tight enough...Our GT80 race twins run the exact same hub at 11,500 with the pins pulled...TIGHT..No slip..
Every Zenoah 45,62, and 80 ever made uses the same hub...Normal rotation just makes the bolt tighter... |
RE: Zenoah Drill Jig?
Thanks for all the advice. I will assume the answer to my question is no.
Thanks, Tony |
All times are GMT -8. The time now is 09:00 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.