Need help finding this spinner
 

I have a spinner on a G-26 and I would like to get a few more but I can't find any like this. It fits over the stock prop nut and threads on to the end of the prop shaft. If someone knows where I can get these let me know.

RE: Need help finding this spinner
 

Try Tru-Turn. Dan.

RE: Need help finding this spinner
 

I know Harry Higley makes spinner nuts and Tru-Turn does some too.  It does look like it might be a Tru-Turn version though. But I didn't see a Tru-Turn spinner nut setup to screw on over on top of the prop nut though.
Tthere were some other small companies or individuals that make spinner nuts too.  Plus some people tended to modify the spinner nuts as desired too.

RE: Need help finding this spinner
 

I looked at Tru-Turn, Dubro, Tower Hobbies, Hangar 9, Hobby King but I can't find a two piece one like this.

RE: Need help finding this spinner
 

Go here and send unclegeorge a PM, i believe he has (or had) what you are looking for. http://www.rcgroups.com/forums/member.php?u=57150

RE: Need help finding this spinner
 

Thanks for the info. If I can't find it I'll use a Tru-Turn.

RE: Need help finding this spinner
 

I bought a "spinner" like that from B&B Specialties, for my G-23.

RE: Need help finding this spinner
 

Tom,
That might be it.

http://www.bennettbuilt.com/shop/Spi...mm_thread.html

Thanks,

RE: Need help finding this spinner
 

If you can't find it Tru-Turn will make it. But Bennett Built list them on there site.

RE: Need help finding this spinner
 

I'm not sure but maybe this would do the job

[link=http://www.truturn.com/cgi-bin/store/agora.cgi?p_id=tth9bpstdandblank&ppinc=prophubs&ex act_match=on]Standard A-Style Prop Hub BACKPLATE[/link]

[link=http://www.truturn.com/cgi-bin/store/agora.cgi?cart_id=1890849.12448*R805s4&keywords=Pr op+Nut&next=30&maxp=30&ppinc=1apropnuts]Prop Hub[/link]