RCU Forums - 100cc Tecumseh engine

RCU Forums (https://www.rcuniverse.com/forum/)

- Gas Engines (https://www.rcuniverse.com/forum/gas-engines-142/)

- - 100cc Tecumseh engine (https://www.rcuniverse.com/forum/gas-engines-142/2322085-100cc-tecumseh-engine.html)

Orvie6

11-06-2004 11:37 AM

100cc Tecumseh engine

I have a 2 cycle 109cc Tecumseh engine that I took out of an old snowblower. I have "trimmed" it down and removed the large diameter flywheel and magneto assembly. I plan on using an electronic ignition on it and will be replacing the original float bowl carb with a Tillitson carb (HL314 or similar) like those used on Go Kart racing engines. My main question is: Has anyone heard of or used this engine before? It weights about 7 pounds now and is in very good mechanical condition. I presently do not have a use for it but got the snowblower in with the string trimmers with smaller engines! Any comments are welcome.

mrbigg

11-07-2004 02:18 PM

RE: 100cc Tecumseh engine

how about a couple of pictures?

RCVFR

11-08-2004 02:42 PM

RE: 100cc Tecumseh engine

You might get more response if you post this in the "engine conversions" forum.;)

Big_Bird

11-08-2004 05:43 PM

RE: 100cc Tecumseh engine

What's a snowblower? :D

Ken
from Texas

TLH101

11-08-2004 06:35 PM

RE: 100cc Tecumseh engine

Quote:

ORIGINAL: Big_Bird

What's a snowblower? :D

Ken
from Texas

i think they make "sno-cones" with them. [sm=lol.gif]

bdtsr

11-08-2004 10:57 PM

RE: 100cc Tecumseh engine

Actualy you should have a 98cc engine. The Walbro WGA-3 carb will bolt up but needs a crank case pulse fitting tapped into the engine case and run to the carb. Yes I have one. I also have the 138cc and 49cc Tecumseh's as well. There is more info in the "Conversions" side.

All times are GMT -8. The time now is 02:24 PM.