G62 EXHAUST FOR ZIROLI AT6
 

I'm desperately trying to find a scale exhaust for an inverted mounted G62 powered Ziroli AT6. I've searched everywhere online, and have even asked Nick Ziroli himself. He informed me that J-tech used to manufacture them. The only problem now is I can't find anything on J-tech. Have they gone under? Every website I've found that pertains to J-tech is no longer valid. I'm about to pull my hair out on this one. I've got a nice scale AT-6 but I can't find a scale exhaust for it, which makes no sense to me because if I remember correctly scale exhausts used to be a requirement of the AT-6 class races. The exhaust should exit right behind the cowl on the right side (when sitting in it). Here is a link to an old Byron AT-6 with the correct setup, which is what I'm after. If anyone knows of any manufactures custom or otherwise that can help me please let me know!

http://perfectplanes.tripod.com/byron.html


Thanks!

RE: G62 EXHAUST FOR ZIROLI AT6
 

Mac's Products made the pipes for the USRA racers...:D

RE: G62 EXHAUST FOR ZIROLI AT6
 

From the Tower Hobbies website.


J'Tec Radiowave
J'Tec (JTC)
PO BOX 1847
521 E CENTER AVENUE
MORRESVILLE, NC 28115
PHONE: 704-799-1658
http://www.jtecrc.com/ This link doesn't work. But, at least it's a phone number and address to get you started.