RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Gas Engines (https://www.rcuniverse.com/forum/gas-engines-142/)
-   -   (https://www.rcuniverse.com/forum/gas-engines-142/629035-a.html)

mpj220 03-17-2003 02:53 AM


 
No longer support RCU

epc 03-17-2003 04:10 AM


 
mpj 220:

I have the same engine so I think I can help you a litle bit.

1- 50:1 any good 2 stroke engine Amsoil , red line ( I'm using Motul racing on mine )
2-That will depend on the batt. capacity I think you should use at least a 1000 mah. 4.8 batt. pack.
3.Very easy to start hand flip , For the choke you can use a servo if you want but it is not necessary just use a piece of wire and do it manually.
4-20x10 is a good prop the one that I found to be the best for this engine is the Menz S 20x10.( Also the mejzlik 20x10 )
5- Yeah two needles The one with the H beig the high and the other one L low setting. H 1 1/2 and L 3/4-1 more or less depends on your weather and altitude.
6-Tru turn , Dave Brown. ( I like the tru turn and they sell it alredy drilled for 3w engines if you want ).

Hope this helps.

epc.

mpj220 03-17-2003 01:45 PM


 
No longer support RCU

epc 03-17-2003 02:08 PM


 
The High " H " is the one in the front closer to the prop hub, and the low is the one on the back.


epc.

mpj220 03-17-2003 10:00 PM


 
No longer support RCU


All times are GMT -8. The time now is 08:16 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.