RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Gas Engines (https://www.rcuniverse.com/forum/gas-engines-142/)
-   -   spe 26 engine (https://www.rcuniverse.com/forum/gas-engines-142/6306324-spe-26-engine.html)

aeroscala 08-30-2007 08:22 AM

spe 26 engine
 
Hii
I´m thinking about buying a spe 26 engine. What are your opinions about these? Your experiences? Reliabilility? Durability? Thanks in advance for any inputs.
José Ignacio. Spain.

rambo 08-30-2007 12:49 PM

RE: spe 26 engine
 
In spite of what you may hear i think there a good value for the money.As they come from factory there's a lot of room for more performance.Read spe timing post i recently posted.They do run dependably and have good power out of the box for the money.BTW i've been running gassers for better that 10yrs. so i have some experiance.;)

PA BEN 09-03-2007 09:01 AM

RE: spe 26 engine
 
Started mine yesterday for the first time. Used my reg. nitro electric starter. With no adjustments to the carb it ran well. It idled at 2300 and the hi end was 6400 with a 18x6 prop. I flew the plane for about 10 mins very rich. Landed and ran the rest of the gas out. The idle smoothed out even more and the Hi end was 6990 still with no adjustments to the carb. It ran very good right out of the box.
This is the one I have. http://www.greenmodelusa.com/SPE_GasEngine.html

3DAP 09-03-2007 04:22 PM

RE: spe 26 engine
 
Which plane do you have it in?

3DAP

PA BEN 09-03-2007 07:26 PM

RE: spe 26 engine
 
CMP Giles 202 140 http://www.egrandbuy.com/aegi20214072.html


All times are GMT -8. The time now is 11:58 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.