Eagle Aviation One Design Build
#126
Thread Starter
Bringing back the dead!!!!!
After numerous attempts to match the fluorescent green paint I gave up and set this project aside back in 2016. Been staring at it ever since. I have decided to remove the green and blue colors and replace these with Monokote True Red, Orange and Yellow covering. Don't know if I will get this finished before the snow flies but it is moving along. Sorry for waking up this old thread but would like like bring it to a close.
After numerous attempts to match the fluorescent green paint I gave up and set this project aside back in 2016. Been staring at it ever since. I have decided to remove the green and blue colors and replace these with Monokote True Red, Orange and Yellow covering. Don't know if I will get this finished before the snow flies but it is moving along. Sorry for waking up this old thread but would like like bring it to a close.
Last edited by Tony Hallo; 09-26-2022 at 12:54 PM.
#129
Thread Starter
Thank you both for the comments, the scheme is Plain Jane by today's standards for sure. It more like the plane I saw fly at Osh Gosh in the early 90's.
#130
Thread Starter
The covering work is complete and began painting. With a little luck I will get this plane in the air before the snow flies here in south western Pennsylvania.
The following users liked this post:
sensei (09-30-2022)
#133
Thread Starter
Had the One Design out at the field yesterday, did not get it running, no spark. I got the engine from an estate sale about 10 years ago. I thought had I had checked the spark when I put the jumper on the TechAero IBEC. I pulled the ignition off another D&B engine that I have, might fly today?
#134
Had the One Design out at the field yesterday, did not get it running, no spark. I got the engine from an estate sale about 10 years ago. I thought had I had checked the spark when I put the jumper on the TechAero IBEC. I pulled the ignition off another D&B engine that I have, might fly today?