RCU Forums - OMP 80" Edge 540 Profile Kit +SP 3250

RCU Forums (https://www.rcuniverse.com/forum/)

- Giant Scale Aircraft - 3D & Aerobatic (https://www.rcuniverse.com/forum/giant-scale-aircraft-3d-aerobatic-110/)

- - OMP 80" Edge 540 Profile Kit +SP 3250 (https://www.rcuniverse.com/forum/giant-scale-aircraft-3d-aerobatic-110/1911278-omp-80%22-edge-540-profile-kit-sp-3250-a.html)

flyhi2005

06-17-2004 03:10 PM

OMP 80" Edge 540 Profile Kit +SP 3250

omp 80" Edge 540 Profile Kit

i'm planning to use SP 3250 eng as a power plant???? .

good?? or bad??

or MOKI 180???

thenks

martyg

06-17-2004 09:57 PM

RE: OMP 80" Edge 540 Profile Kit +SP 3250

1 Attachment(s)

I have a Moki 180 on mine. Running 18x8 prop with 0% fuel. Power is good.
Mine turned out tail heavy. Had to add 8oz of lead in the nose to get into balance.
If I were to do it again, I would use a Moki 210 or MDS 218.
Keep it below 13lb, and you'll have a great flying plane! It's one of my favorites.

flyhi2005

06-18-2004 04:56 AM

RE: OMP 80" Edge 540 Profile Kit +SP 3250

thenks martyg ;)

deadstick60

11-06-2012 03:31 AM

RE: OMP 80

Is there anyway to get a copy of the plans from one of you guys? I have a s3000 looking for a home in this aircraft but they do not kit it anymore. please email me, [email protected].

All times are GMT -8. The time now is 10:41 PM.