Bigairplanes.com 41% Pitts 12
 

After letting it sit in my basement for over a year, I am finally covering my Pitts 12 from Bob Trueworthy's plans. The kit is very well thought out. Production kits should be available this spring. Going with Red Bull Scheme, graphics from Brad at BadBradGraphics.com. Very nice guy to work with and reasonable. Will post more pics as I get closer. Craig

RE: Bigairplanes.com 41% Pitts 12
 

A few more pics

RE: Bigairplanes.com 41% Pitts 12
 

Very nice photo work

RE: Bigairplanes.com 41% Pitts 12
 

what motor and radio combo are you going to use?

Kent

RE: Bigairplanes.com 41% Pitts 12
 

Getting ready to fly his 35% this spring. Had a great time with the kit. Dennis

RE: Bigairplanes.com 41% Pitts 12
 

estimated street price for the kit???? Or arc/ark?

RE: Bigairplanes.com 41% Pitts 12
 

http://www.bigairplanes.com/






Neo

RE: Bigairplanes.com 41% Pitts 12
 

This is really some nice & clean work!! Looking forward to flying report and more photos of this baby!!

RE: Bigairplanes.com 41% Pitts 12
 

Thanks for the replies. I plan on a DA 150, JR 8611's. You would have to contact Bob at Bigairplanes for a price. I have seen the lasercutting for his kits and it is VERY nice. He has been flying both this version and the newer production version for a couple of seasons now and has gotten excellent feedback from many of the big name pilots. I am planning on having this one done for Joe Nall. cbk

RE: Bigairplanes.com 41% Pitts 12
 

,,just thought i'd pass on some comments,,,and a pic,,(if it'll up-load,,LOL,, this was my first experience with laser cut parts,,,I'm an old scratch builder from way back!!,,VERY NICE!!,,this plane was a joy to build!!,,It's got a DA150,,hitec digital servoes,,,optical isolator,,with power bus,,4.8 pack on the rx ,,and a 6v 4000 pack on the bus for the servos. ,,I've been in the hobby 39 years,,can't remember an airplane that was as much fun to build as this!! looking forward to the spring!!,,

RE: Bigairplanes.com 41% Pitts 12
 

Hi Craig
Very nice looking plane, you do great work as always
I hope that the new DA 200 will be available by the time I have mine ready, well by then they may even have a DA300?? Who knows!!!
Bob if you see this, I am only kidding.
Elie

RE: Bigairplanes.com 41% Pitts 12
 

Thanks Elie. Sorry to have hijacked your Red Bull Scheme! I received some of my graphics from Brad today and couldn't resist trying a couple out. Nice work Brad!! Will post as I get closer. Craig

RE: Bigairplanes.com 41% Pitts 12
 

By the way, I spoke with Brad about these graphics on Sunday afternoon and had them today!! Thanks Brad. Craig

RE: Bigairplanes.com 41% Pitts 12
 

Can't wait to get one of these short kits. I am on the list and have talked to Bob a couple of times about them. Won't get to build it for a couple years but I want to make sure I have one when the shop gets built.
The Red Bull should look great on this plane.

RE: Bigairplanes.com 41% Pitts 12
 

Hi Craig!
Bob told me that you were interested in this Monster Pitts 12 logo. I got this from the owner of the full size version of my 35% Pitts 12. Bobs kits are great and good luck with yours. This is the highest res image I have of the Monster logo. Have you seen any pix of my cockpit kit for Bob's Pitts 12?
Kregg

RE: Bigairplanes.com 41% Pitts 12
 

Hey! Kregg!! Ok,,,WHERE !! can I get that logo!! (I'm falling off my chair!!,,LOL,,),,I posted the pic of mine,,,the orange one,,,and just where on the plane is it located?? Toledo is coming up,,(I live 1 hour awayfrom the seagate center :D),,maybe somebody will have it there??,,, Thanks Dave

RE: Bigairplanes.com 41% Pitts 12
 

Dave,
The owner of the full scale version of mine lives in South Africa. He sent me this logo image and indicated that he will be placing it on eiter side of the cowl in the rear/top section of the cowl. Not real large. Unfortunatly I have never recived a pic with the logo added. He was the one to have this logo created to the best of my knowlage. It is not an offical logo of any kind. Just one mans fun. Down load that logo in the post above and I'm sure you could find someone to make a decal for it. Just do not sell it to anyone, since we did not create it.

Here is a few pix of my Pitts 12.

RE: Bigairplanes.com 41% Pitts 12
 

Hey guys what happened to the origonal emblem..The MACHO STINKER pumped up skunk? That is the one I am going to put on mine when built.

RE: Bigairplanes.com 41% Pitts 12
 

The full scale aircraft have not used the MACHO STINKER very much if at all. Actually the full sacel version of mine was only the second (?) Pitts 12 built and he does (did) have that logo on his. I have not seen it on any other full scale aircraft. I will try and find the pix.

RE: Bigairplanes.com 41% Pitts 12
 

Kregg, thanks for the logo. It looks pretty cool. Will have to see if I can have someone make me a couple. I have seen your cockpits also. May talk to you about one down the road. Plane looks great! Take care, Craig

RE: Bigairplanes.com 41% Pitts 12
 

I don't think he was the second, Curtiss #1, Ben Morphew #2, Kimball #3 and one in PA that went in on an engine failure and so on and on. I know he is one of the top 10 though..
I just like the Big Skunk as it flows with all the pitts models..I have pictures of it in the Mags on this plane. Kevins was actually called the falcon, I believe due to the design changes and the fact the rights were sold to another party first. He then sold his parts as modified M-12 pieces and then finally purchased the rights to the Pitts M-12 and now do it all. The origonal pitts has rounded wing tips and a longer fuse. Kevin made a host of design changes to increase maneuverability and reposition the pilot for better G-loading. Also the upper wing was lowered from the origional and the tail shortened for balance purposes.
Great airplane though want to build one someday..

RE: Bigairplanes.com 41% Pitts 12
 

Hey! Kregg!! Thanks for the reply,,,that logo IS different!!,,,LOL,, As another person put in this thread,,,where's the other types of logo's??,,,I'll have SOMETHING on mine when spring get's here!!,,and,,oh yes,,,the pics of your's are great!! That one from the rear is very cool!! Thanks Dave

RE: Bigairplanes.com 41% Pitts 12
 

Making a little progress. The canopy is ready for mounting/painting and the cowl is mounted ready for paint. The DA should be here for the end of the week so I can finish up the front end and the rest of the graphics should arrive in a day or two. Covering wise, all that is left is the wings. A friend of mine polished the gear also. Will post more pics as I get closer. Looking like no problem to get it ready for Joe Nall. Craig

RE: Bigairplanes.com 41% Pitts 12
 

A few more pics

RE: Bigairplanes.com 41% Pitts 12
 

How about mine?
Elie
[:@]