Byron large scale wing joiners and receivers
Does any one have any of the large scale receivers that Byron used in his giant scale planes? They measured 1 1/2" by 1/2" by 2 1/2".
https://cimg4.ibsrv.net/gimg/www.rcu...909fc32239.jpg |
Sig sells them. https://sigmfg.com/products/sig-gian...um-wing-joiner
|
Sig sells a smaller version. I tried them. But thanks for the reply!
https://cimg5.ibsrv.net/gimg/www.rcu...4c64a27a18.png |
https://cimg2.ibsrv.net/gimg/www.rcu...951565fbd3.jpg
I got four of them from a Glasair kit, send me a PM. |
One kit used 4 of them?
Dean Lassek 5523 S. Ward Way Littleton, CO. 80127 |
Hopefully I will get to the post office before the grandsons arrive tomorrow.
|
Originally Posted by A10FLYR
(Post 12603317)
One kit used 4 of them?
Dean Lassek 5523 S. Ward Way Littleton, CO. 80127 |
Interesting thought. I haven't flown a big plane with them. I did fly a bunch of Byron DF stuff with the smaller ones.
My Corsair is one of the first shipped out way back when. Still needs clear coat. And I want to update the push rods and servos before I fly it. |
The Glasair and Pipe Dream shared the same wings and two joiners per wing panel were used. I elected not to use the joiners in my build which ended up being a mistake. I used 1/8" aircraft plywood spars that overlaped the fuselage former however I didn't account for the drag forces. As i leaned out the engine and speed increased the right wing panel failed. I have another fuselage and most of the parts to build another, just need a set of windows, wish I could find a set.
https://cimg7.ibsrv.net/gimg/www.rcu...6fb7f7bf7e.jpg |
Dean,
They are on the way. |
OMG! You didn't even give me a price yet!
Are you on Facebook? There is a couple of Byron groups there that I just discovered while looking for the receivers. |
No I don't do facebook.
Here's a quote from another forum that I find to be true "Nice to see you kept the build thread going Roger. Facebook has decimated forums which I don't understand because Facebook empowers the worst elements in society while also putting our personal information out for everyone to mine." |
Probably just as well. A well known person was asked about personal info and privacy on the internet. His reply was, "It's too late. Google and facebook have already done the damage".
The Glassairs that I saw there were already sold. |
They have arrived1
Originally Posted by Tony Hallo
(Post 12603551)
Dean,
They are on the way. Thank You... |
I'm glad they are going to good use.
|
All times are GMT -8. The time now is 07:57 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.