First Build thread Will need help
 

This is the 3rd time I've tried to upload some photos dont know were they go or how to attach?

RE: First Build thread Will need help
 

You have a Private Message

RE: First Build thread Will need help
 

It is normally easier to do once you have a post, then you either hit the reply tab, or the quote tab, and then when you wish to upload a photo or drawiing, once you habe made your commentary, just hit the tab at the bottom of your post where it says click here to upload images and files. Then you will be taken to your documents file, where you will select the appropriate photo, and once you select that, hit ok. Then once it tells you that the upload is complete, hit ok again, then you will come back to the post, and hit ok to close out your post with the uploaded files. It's pretty simple once you do it.

Bill, AMA 4720
WACO Brotherhood #1

RE: First Build thread Will need help
 

Sweet making some headway got the picture up so a little about me and my thread. I like to build and realy ejoy flying I like 3d and would like to get int IMAC but dont know anyone who flys it locally. I have built a few planes and have choosen to do this thread on my Staudacher GS 300 that I picked up last Feb. from lanier, it was around $200. I want to build this thing as light as I can I would rather have it brake than to fly heavy so I will power it with a ZDZ 80rv. I hope I can get it to way under 20? I an also budget minded and will be looking to save as much money os I can.
I noticed that there are many parts of this kit that I would not call top notch but consiedering the cost I am not disappointed at all. A little work and some good advice I hope I will have a cheap plane that was fun to build and flies good.
I have started to do some lightening and will be doing some foam work on this plane also.ie coring the wings and cutting the hatch and the turdle deck out of foam. I planed on sheeting the wings and what ever else I could out of 1/16th sheeting. So I make my list from Lonestar Balsa went to order it and sa that it had burned down over the weekend. Here are a few more pics (I hope)

RE: First Build thread Will need help
 

...pics

RE: First Build thread Will need help
 

cut alot of holes in foam and wood

RE: First Build thread Will need help
 

getting ready

RE: First Build thread Will need help
 

Fourm has moves to FG Thanks for looking:D