SkysharkRC Edge 540
05-13-2006, 06:32 AM
#1
Member
Thread Starter
My Feedback: (3)
Join Date: Jan 2003
Location: Redding,
CT
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
SkysharkRC Edge 540
Has anyone done this yet?
I found a great thread on the ARF kit but all with 4 stroke power.
http://www.rcuniverse.com/forum/m_33...tm.htm#3372413
Plans are to use a Axi 4130/20, 8S2P 8000mAh lipo starting out with a 18x8E prop
Battery location is where I am looking for help. One possibility is to open up the area where the fuel tank would have gone.
I found a great thread on the ARF kit but all with 4 stroke power.
http://www.rcuniverse.com/forum/m_33...tm.htm#3372413
Plans are to use a Axi 4130/20, 8S2P 8000mAh lipo starting out with a 18x8E prop
Battery location is where I am looking for help. One possibility is to open up the area where the fuel tank would have gone.
05-15-2006, 08:16 AM
#2
Member
Thread Starter
My Feedback: (3)
Join Date: Jan 2003
Location: Redding,
CT
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
RE: SkysharkRC Edge 540
This kit has gone together quick. The guys at SkysharkRC have done a great job.
I pulled the ply fuel tank support and set the batteries in the engine box. The CG came out near perfect. I made up a battery tray and have set the batteries in with 3/8" balsa & foam spacers to allow for airflow.
If anyone has another way, please let me know. It's going to be few day before I get back to this and finish off the wiring.
I pulled the ply fuel tank support and set the batteries in the engine box. The CG came out near perfect. I made up a battery tray and have set the batteries in with 3/8" balsa & foam spacers to allow for airflow.
If anyone has another way, please let me know. It's going to be few day before I get back to this and finish off the wiring.
