Towerhobbies Kaos conversion
Has anyone converted a tower hobbies Kaos arf I need to cut a hatch for battery and i guess build a new fire wall closer to front for electric motor. any help out their.
|
RE: Towerhobbies Kaos conversion
|
RE: Towerhobbies Kaos conversion
1 Attachment(s)
You can buy the same stuff at your local hardware store a lot cheaper. here's the 2500 watt mount in my 1/4 Cobra.
Walt |
RE: Towerhobbies Kaos conversion
Thanks Jumper,Very helpful there was a thread on here of someone doing a complete conversion he even pulled of all his covering and cut vents hood scoops battery hatch and covered it all in red but I can't seem to find it. all and any input well be very helpful thanks Randyscuda
|
RE: Towerhobbies Kaos conversion
1 Attachment(s)
|
RE: Towerhobbies Kaos conversion
Hey Tommy, Thanks how did yours Fly electric? real nice job covering thumbs up!!! I don't think I wanna take all that covering off, but yours looks like a beauty. WOW REALLY looks FAST AND HOT don't know can a plane look hot LOL...
|
RE: Towerhobbies Kaos conversion
Tommy,hope you see this my Kaos is at 5lbs i put a turnigy 4260/06 60esc 3s3700mah lipo taxis great but will not lift off 13 " prop not fast enough to lift off Help please Randy
|
RE: Towerhobbies Kaos conversion
ORIGINAL: Ranscuda Tommy,hope you see this my Kaos is at 5lbs i put a turnigy 4260/06 60esc 3s3700mah lipo taxis great but will not lift off 13 " prop not fast enough to lift off Help please Randy My first request would be for you to obtain a watt meter and see just how much power your combo is making. Trying to diagnosis the "problem" without one is very difficult. If your Kaos is 5lbs ready to fly I would shoot for 500W to start. Yes it will fly on less, but I don't suppose it will be very much fun. I don't know an awful lot about your motor honestly. Is [link=http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=6231]this[/link] one it? If the motor specs out to 500/600KV I think your being overally optimistic trying to fly the model on only a 3S pack. To make my 500W goal your pack would have to supply say 50A @10V! Somehow I doubt thats going to happen. Let me know how you make out. Tommy D |
RE: Towerhobbies Kaos conversion
Maiden my kaos today 18mph to 25 mph wind gust took off in about 18 feet of runway climbed and climbed a little down trim leveled it off flew great i put 2 3cell 2100mah in a series and man did it have power flew with authority in that wind great landing awesome flew for about 8 minutes and had 57 % of battery left,now i can finish and add the canopy and pilot. like to thank everyone for their input . Thanks Randy
|
RE: Towerhobbies Kaos conversion
1 Attachment(s)
My Kaos e-conversion is fully customized, so I took a dive into the wing loading and power loading numbers. First reaction: is this too good to be true? Perhaps someone can tell me if I am missing something?
Thanks. |
All times are GMT -8. The time now is 04:58 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.