Notices
Glow Engines Discuss RC glow engines

Welcome to Club SAITO !

Old 10-08-2012, 11:19 AM
  #23301  
My Feedback: (3)
 
Join Date: Jan 2003
Location: ROCHESTER, NY
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Welcome to Club SAITO !

I have a Saito FA 30 4c that has open rocker arms.Trying to find out how old it is . .It looks like it may be one of their first 4c engines.
Old 10-08-2012, 11:41 AM
  #23302  
My Feedback: (19)
 
PacificNWSkyPilot's Avatar
 
Join Date: Feb 2004
Location: Raeford, North Carolina
Posts: 3,988
Likes: 0
Received 2 Likes on 2 Posts
Default RE: Welcome to Club SAITO !

<span style="font-family: Verdana, Arial; font-size: 13px; background-color: rgb(251, 252, 255); ">Until last year, I spent every day of my adult life (over 35 years) in dental offices.</span><br style="font-family: Verdana, Arial; font-size: 13px; " /><br style="font-family: Verdana, Arial; font-size: 13px; " /><span style="font-family: Verdana, Arial; font-size: 13px; background-color: rgb(251, 252, 255); ">One thing I know all about are dentifrices. I even know which brands took the longest to stop using the harsh abrasives.</span><br style="font-family: Verdana, Arial; font-size: 13px; " /><br style="font-family: Verdana, Arial; font-size: 13px; " /><span style="font-family: Verdana, Arial; font-size: 13px; background-color: rgb(251, 252, 255); ">I was one of those Dental Company lifers.</span><br style="font-family: Verdana, Arial; font-size: 13px; " /><br style="font-family: Verdana, Arial; font-size: 13px; " /><span style="font-family: Verdana, Arial; font-size: 13px; background-color: rgb(251, 252, 255); ">All of that useless info aside, Automotive rubbing and/or polishing compounds are probably the next best thing, assuming that you discovered you're out of the surprisingly cheap stuff called valve lapping compound, and also found that your car is out of gas, so you can't buzz over to the auto store, hardware store, or WalMart.</span><br style="font-family: Verdana, Arial; font-size: 13px; " /><br style="font-family: Verdana, Arial; font-size: 13px; " /><span style="font-family: Verdana, Arial; font-size: 13px; background-color: rgb(251, 252, 255); ">Most of the time, it's the buildup that needs to be removed from the valve and seats. More of a cleaning than a grinding. If it's been there too long, your car / bike, r/c motor is going to need more than paste.</span><br style="font-family: Verdana, Arial; font-size: 13px; " /><br style="font-family: Verdana, Arial; font-size: 13px; " /><span style="font-family: Verdana, Arial; font-size: 13px; background-color: rgb(251, 252, 255); ">Of course, there's always blw's revelation that nobody actually said that anyway, so nobody really wants to know.</span><br style="font-family: Verdana, Arial; font-size: 13px; " /><br style="font-family: Verdana, Arial; font-size: 13px; " /><span style="font-family: Verdana, Arial; font-size: 13px; background-color: rgb(251, 252, 255); ">"A waste of time" might be a fair assessment of this, except that I just got off the phone with the State of Texas. An hour and a half.</span><br style="font-family: Verdana, Arial; font-size: 13px; " /><br style="font-family: Verdana, Arial; font-size: 13px; " /><span style="font-family: Verdana, Arial; font-size: 13px; background-color: rgb(251, 252, 255); ">Makes one realize that "A waste of time" comes in many sizes, and Texas does everything extra big when it comes to red tape.</span><span style="font-family: Verdana, Arial; font-size: 13px; background-color: rgb(251, 252, 255); "></span><br style="font-family: Verdana, Arial; font-size: 13px; " /><br style="font-family: Verdana, Arial; font-size: 13px; " /><br style="font-family: Verdana, Arial; font-size: 13px; " /><span style="font-family: Verdana, Arial; font-size: 13px; background-color: rgb(251, 252, 255); ">~ Jim ~</span>
Old 10-08-2012, 11:53 AM
  #23303  
My Feedback: (19)
 
PacificNWSkyPilot's Avatar
 
Join Date: Feb 2004
Location: Raeford, North Carolina
Posts: 3,988
Likes: 0
Received 2 Likes on 2 Posts
Default RE: Welcome to Club SAITO !

Sr Telemaster 150,

My brother lives about ten minutes from you, in Potsdam. Nice spot to live.

~ Jim ~
Old 10-08-2012, 02:54 PM
  #23304  
Senior Member
 
SrTelemaster150's Avatar
 
Join Date: Feb 2012
Location: Brasher Falls, NY
Posts: 3,904
Likes: 0
Received 2 Likes on 2 Posts
Default RE: Welcome to Club SAITO !

ORIGINAL: TexasSkyPilot

Until last year, I spent every day of my adult life (over 35 years) in dental offices.

One thing I know all about are dentifrices. I even know which brands took the longest to stop using the harsh abrasives.

I was one of those Dental Company lifers.

All of that useless info aside, Automotive rubbing and/or polishing compounds are probably the next best thing, assuming that you discovered you're out of the surprisingly cheap stuff called valve lapping compound, and also found that your car is out of gas, so you can't buzz over to the auto store, hardware store, or WalMart.

Most of the time, it's the buildup that needs to be removed from the valve and seats. More of a cleaning than a grinding. If it's been there too long, your car / bike, r/c motor is going to need more than paste.

~ Jim ~

I wouldn't want to use valve lapping/grinding compound on a Saito valve seat.

Maybe some white "polishing paste" though.
Old 10-08-2012, 02:56 PM
  #23305  
Senior Member
 
SrTelemaster150's Avatar
 
Join Date: Feb 2012
Location: Brasher Falls, NY
Posts: 3,904
Likes: 0
Received 2 Likes on 2 Posts
Default RE: Welcome to Club SAITO !


ORIGINAL: TexasSkyPilot

Sr Telemaster 150,

My brother lives about ten minutes from you, in Potsdam. Nice spot to live.

~ Jim ~

Does he fly R/C?

Potsdam is more like 20 minutes away, 18 miles.
Old 10-08-2012, 03:06 PM
  #23306  
My Feedback: (19)
 
PacificNWSkyPilot's Avatar
 
Join Date: Feb 2004
Location: Raeford, North Carolina
Posts: 3,988
Likes: 0
Received 2 Likes on 2 Posts
Default RE: Welcome to Club SAITO !

I haven't seen any buildup on any Saito seats I ever had. I had a couple of valves lock up during one winter when I forgot to use after-run oil late in the fall.

They weren't frozen, so much as sticky. I put after-run oil in and worked them for a while. I'm sure some scale had developed over the winter. Fortunately, no lasting effects.

Compared to auto and motorcycle heads, the Saitos I work on are always pristine in comparison. I suppose a lot depends upon the conditions under which it was run. Cowled in without a lot of air, running hot for that reason or some other reason. The glows can get buildup from heat, that's for sure.

I'm all but out of the Saito club these days. One .72a, in my little Sig Sundancer Bipe. Powerful for a small 4-stroke!

I've gone to gassers for the rest. But my flying buddies will see to it that I still get to work on plenty of them! Phil brought a radial over the other day to troubleshoot. Once we took that dust cover off the venturi, it ran pretty good!

~ Jim ~
Old 10-08-2012, 03:28 PM
  #23307  
My Feedback: (19)
 
PacificNWSkyPilot's Avatar
 
Join Date: Feb 2004
Location: Raeford, North Carolina
Posts: 3,988
Likes: 0
Received 2 Likes on 2 Posts
Default RE: Welcome to Club SAITO !

No, he's a sports nut and does it from his armchair.

He works at the college there.

~ Jim ~
Old 10-08-2012, 03:55 PM
  #23308  
My Feedback: (19)
 
PacificNWSkyPilot's Avatar
 
Join Date: Feb 2004
Location: Raeford, North Carolina
Posts: 3,988
Likes: 0
Received 2 Likes on 2 Posts
Default RE: Welcome to Club SAITO !

Hey guys,
I was just spoken to pretty harshly by a Mod over some things I said in here. I've posted less than a half-dozen times in the last day or so, I don't remember insulting anybody, picking any fights, or saying anything derisive about RCU (???) but if anything I said was in any way amiss, I apologize, and did not realize I was being anything other than chatty and conversational.

Unsubscribed.

[8D] ~ Jim ~ [8D]
Old 10-08-2012, 04:20 PM
  #23309  
My Feedback: (9)
 
Join Date: Jun 2009
Location: Arlington, TX
Posts: 720
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Welcome to Club SAITO !

I want to put new bearings in my FA-80GK but, Boca offers 5 different types. Which one do you guys recommend?

<span class="SearchListingKitTitle" id="ctl00_Main_SearchResults1_Repeater2_ctl01_Labe l1">SAITO - FA-80, 80 Econo Power RC Engine Bearings</span>

<span class="SearchListingKitTitle" id="ctl00_Main_SearchResults1_Repeater2_ctl02_Labe l1">SAITO - FA-80, 80 High Performance RC Engine Bearings</span>

<span class="SearchListingKitTitle" id="ctl00_Main_SearchResults1_Repeater2_ctl03_Labe l1">SAITO - FA-80, 80 Stainless Steel RC Engine Bearings</span>

<span class="SearchListingKitTitle" id="ctl00_Main_SearchResults1_Repeater2_ctl04_Labe l1">SAITO - FA-80, 80 Ceramic Lightning Performance RC Engine Bearings</span>

<span class="SearchListingKitTitle" id="ctl00_Main_SearchResults1_Repeater2_ctl05_Labe l1">SAITO - FA-80, 80 Ceramic High Performance RC Engine Bearings</span>


Thanks,
RJ
Old 10-08-2012, 04:28 PM
  #23310  
 
Join Date: Apr 2006
Location: Warialda NSW, AUSTRALIA
Posts: 2,275
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Welcome to Club SAITO !

G'day RJ,
I always prefer Stainless bearings, a lot less rust to worry about, & I know someone will disagree,
but with a 4 stroke, the revs are a lot less than a 2 stroke, so high performance is not an issue.
Just my 2 cents worth.

Cheers
Old 10-08-2012, 04:29 PM
  #23311  
Member
 
Join Date: Sep 2007
Location: port hedlandwestern australia, AUSTRALIA
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Welcome to Club SAITO !

Rowdyjoe, ...I look at these factors ; 1 - how much am I going to use that engine
2 - what size model am I going to put it in
the econo bearings are ok, I have them in several engines, and at the other end of the scale, I dont believe there is anything gained from using the most expensive ones, so it really is a matter of choice
A.A. Barry
Old 10-08-2012, 06:28 PM
  #23312  
My Feedback: (9)
 
Join Date: Jun 2009
Location: Arlington, TX
Posts: 720
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Welcome to Club SAITO !

Thanks guys. I went with the stainless bearings. I figure they will outlast me and the plane.

RJ
Old 10-08-2012, 07:33 PM
  #23313  
 
Ernie Misner's Avatar
 
Join Date: Jul 2002
Location: Tacoma, WA
Posts: 5,037
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Welcome to Club SAITO !

Just curious, I haven't heard of anyone ordering from RC Bearings lately. Aren't these FA 80 prices considerably cheaper?

http://www.rcbearings.com/saito-80-bearings/ Ask for Paul

Thanks, Ernie
Old 10-08-2012, 07:48 PM
  #23314  
My Feedback: (9)
 
Join Date: Jun 2009
Location: Arlington, TX
Posts: 720
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Welcome to Club SAITO !

Ernie,
Wasn't aware of RC Bearings until now. Everyone recommends Boca so, that's where I bought mine.
Yes, the price does appear to be much cheaper at RC Bearings. Assuming the quality is the same, it's a deal you can't refuse ....about 1/2 price.

RJ
Old 10-08-2012, 07:50 PM
  #23315  
 
Ernie Misner's Avatar
 
Join Date: Jul 2002
Location: Tacoma, WA
Posts: 5,037
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Welcome to Club SAITO !

Well keep Paul in mind. He used to be more active here at RCU but is keeping a lower profile now I guess. The bearings should be the same quality, ... hey ask Paul!
Old 10-08-2012, 10:40 PM
  #23316  
My Feedback: (15)
 
frets24's Avatar
 
Join Date: Dec 2007
Location: charlotte, NC
Posts: 1,245
Likes: 0
Received 1 Like on 1 Post
Default RE: Welcome to Club SAITO !

Paul is just busy lately, it seems. Uptick in business? I still get promotional emails on a regular basis. Great people there at RCB and the bearings are all from high end, quality MFG's.

I like the SS bearings with the open phenolic cages...no worries on corrosion or pitting to slow them up and plenty of open space for the lube to get everywhere it needs to easily.




Club Saito #770
Old 10-09-2012, 04:35 AM
  #23317  
 
Rudolph Hart's Avatar
 
Join Date: Apr 2008
Location: Perth, AUSTRALIA
Posts: 4,383
Likes: 0
Received 2 Likes on 2 Posts
Default RE: Welcome to Club SAITO !

You guys have got me worried,heaps of other folks too i'm bettin.Who says bearing quality beats how carefully you fit them?
Old 10-09-2012, 08:18 AM
  #23318  
Senior Member
My Feedback: (1)
 
Join Date: May 2002
Location: Hendersonville, TN
Posts: 306
Likes: 0
Received 1 Like on 1 Post
Default RE: Welcome to Club SAITO !

Well, I only have a couple of Saitos, but found them to be superior engines. Some many years ago when they first came out with the .30 with exposed rockers, I bought one and put it in a swizzle stick and used it as a trainer. I ran it on stock 10% fuel which had some castor in it. I ran it many many hours. Finally I fouind the valve stems so worn that they looked like they would break if you touched one. I had to buy a complete head which had the valves etc in it as a unit.
When I took the engine down, it was clean inside and when I reassembled it with the new head/valves the compression was as new...I could not find any wear in the sleeve or piston....don't know what they used but that baby had many hours of running and still was as tight as new....
They make one fine and long lasting engine....the best!!!! I have an 80 of theirs in a Bruce Tharp Flyin' King and it pulls it with authority....

Regards to all,
Frank Schwartz AMA123
87 years young and still building and flying...........happiness, for sure.....
Old 10-09-2012, 08:38 AM
  #23319  
My Feedback: (2)
 
JNorton's Avatar
 
Join Date: Jan 2002
Location: Coopersville, MI
Posts: 4,335
Received 2 Likes on 2 Posts
Default RE: Welcome to Club SAITO !

You have to fit them carefully no matter what type of bearing you use. Ceramics are especially fussy when it come to installation. I like standard high performance steel bearings myself. I believe SS is softer than normal steels. Just my two cents.
John
Old 10-09-2012, 08:53 AM
  #23320  
blw
My Feedback: (3)
 
blw's Avatar
 
Join Date: Mar 2004
Location: Opelika, AL
Posts: 9,447
Likes: 0
Received 2 Likes on 2 Posts
Default RE: Welcome to Club SAITO !

Frank, we had a crazy club member who had a red Flying King and the 80 pulled it with stump pulling authority. I saw several dozen imminent crashes saved literally at the last second only by the sheer grunt power of the 80.

I also saw that this Flying King would fly perfectly fine with all of the covering peeled back from the whole fuselage side. Flapping back in the breeze like a streamer. Flight after flight.
Old 10-09-2012, 10:11 AM
  #23321  
Senior Member
My Feedback: (12)
 
lopflyers's Avatar
 
Join Date: Jun 2010
Location: Orlando, FL
Posts: 1,520
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Welcome to Club SAITO !

What!!![X(], you are 87 and your AMA # is 123? I admire you and wish I will still be flying at that tender age. Keep it up sir.
Old 10-09-2012, 01:00 PM
  #23322  
My Feedback: (9)
 
Join Date: Jun 2009
Location: Arlington, TX
Posts: 720
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Welcome to Club SAITO !

Stainless is harder but, more brittle than other steel alloys. Iwent with stainless to reduce the chance of corrosion.


Old 10-09-2012, 01:09 PM
  #23323  
My Feedback: (9)
 
Join Date: Jun 2009
Location: Arlington, TX
Posts: 720
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Welcome to Club SAITO !

I ordered a gasket kit and a few other small items from Advantage Hobby. They had everything I needed at a better price than Horizon and they are Saito parts ...not after-market. I've called my experienced friend who has rebuilt many, many glow engines and he agreed to help me with my FA-80GK. We'll do the deed as soon as the parts arrive.

OOOPs ....almost forgot to mention the results of the carb kit installation. The engine is running much better now but, still haven't found the sweet spot. Ihaven't been able to get the idle below 2400 and the max rpm is around 9100 with a 13x6 prop. However, it's not running a steady rpm at full throttle. It will vary by as much as 200 to 300 rpm when peaked. Before installing the kit, I saw as much as 10k rpm at full throttle with the same size prop.
Any ideas or opinions on what may be causing this variation at full throttle?
I'm getting a good transition now where I couldn't get one at all before. I need to get the low end and high end tuned now.

Old 10-09-2012, 03:50 PM
  #23324  
Senior Member
 
SrTelemaster150's Avatar
 
Join Date: Feb 2012
Location: Brasher Falls, NY
Posts: 3,904
Likes: 0
Received 2 Likes on 2 Posts
Default RE: Welcome to Club SAITO !

ORIGINAL: JNorton

I believe SS is softer than normal steels. Just my two cents.
John


ORIGINAL: rowdyjoe

Stainless is harder but, more brittle than other steel alloys. I went with stainless to reduce the chance of corrosion.


JNorton was right. SS is softer than carbon steel, but it is tougher. It resists corrosion & in rifle barrels, it also resists errosion in the throat from hot gasses. It can also be harder to machine.

High carbon steel is harder & more brittle than SS. I much prefer high carbon steel to SS if knife blades. SS is harder to get a good edge on & it doesn't stay sharp as long . When corrosion is an issue, like razor blades, SS cutting edges last longer.
Old 10-09-2012, 06:58 PM
  #23325  
Member
 
Join Date: Oct 2012
Location: Charlotte, NC
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Welcome to Club SAITO !

<![if gte mso 9]><xml><o:OfficeDocumentSettings><o:AllowPNG /></o:OfficeDocumentSettings></xml><![endif]><p class="MsoNormal">Hello all, I&rsquo;m new to forum. However, I've read a ton of posts before becoming a member and there seems to be a constant request for test results. This is what I've got so far on My Saito 100.
A little history first, I started as a glow guy then left the hobby for several years before getting back into it because the advances in battery and brushless motors intrigued me. Then I heard that sweet sound of a four stroke glow motor. I'm never going back to electric or 2 stroke. Ok, Here are my results:

After Very good break in:
First set up (Stock muffler and 15%n,17%O Fuel)
MAS sport prop 14x8
temp. 85
alt. 650ft
Absolute peak: 10450 RPM
Richened to: 10200 RPM
Idle: 1900 RPM
static thrust: Did not measure
throttle response: idle to full- about 1 second

Second set up (Turbo Header muffler, EXRA550 onboard glow driver set to come on below 25% throttle and Fuel 30%N,23%O)
Motor inverted.
MAS sport prop 15x6
temp. 75
alt. 650ft
Absolute peak: 10700 RPM
Richened to: 10450 RPM
Idle: 1600 RPM
static thrust: 15pounds
throttle response: idle to full- about less than a half second ( the response in the mid ranges from 25%-75% is absolutely amazing)


NOTE 1: In both cases i ran the props before and after balancing and in both cases I had close to a 150 rpm increase.
NOTE 2: The lower idle in the second setup is mostly due to the onboard glow driver but the 30% fuel also helps.
NOTE 3: I haven&rsquo;t done any tests yet on the biggest cause of increase in RPM on the top but I bet its half fuel and half after market muffler.
NOTE 4: This engine runs very cool when using 30%N Fuel
LAST NOTE: I have learned so much from so many in this forum. <span style="mso-spacerun:yes"></span>Thanks for sharing.</p><![if gte mso 9]><xml><w:WordDocument><w:View>Normal</w:View><w:Zoom>0</w:Zoom><w:TrackMoves /><w:TrackFormatting /><w:PunctuationKerning /><w:ValidateAgainstSchemas /><w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid><w:IgnoreMixedContent>false</w:IgnoreMixedContent><w:AlwaysShowPlaceholderText> false</w:AlwaysShowPlaceholderText><woNotPromoteQF /><w:LidThemeOther>EN-US</w:LidThemeOther><w:LidThemeAsian>X-NONE</w:LidThemeAsian><w:LidThemeComplexscript&gt;X-NONE</w:LidThemeComplexscript&gt;<w:Compatibility><w:Bre akWrappedTables /><w:SnapToGridInCell /><w:WrapTextWithPunct /><w:UseAsianBreakRules /><wontGrowAutofit /><w:SplitPgBreakAndParaMark /><w:EnableOpenTypeKerning /><wontFlipMirrorIndents /><w:OverrideTableStyleHps /></w:Compatibility><m:mathPr><m:mathFont m:val="Cambria Math" /><m:brkBin m:val="before" /><m:brkBinSub m:val="--" /><m:smallFrac m:val="off" /><m:dispDef /><m:lMargin m:val="0" /><m:rMargin m:val="0" /><m:defJc m:val="centerGroup" /><m:wrapIndent m:val="1440" /><m:intLim m:val="subSup" /><m:naryLim m:val="undOvr" /></m:mathPr></w:WordDocument></xml><![endif]><![if gte mso 9]><xml><w:LatentStyles DefLockedState="false" DefUnhideWhenUsed="true"DefSemiHidden="true" DefQFormat="false" DefPriority="99"LatentStyleCount="267"><w:LsdExcep tion Locked="false" Priority="0" SemiHidden="false"UnhideWhenUsed="false" QFormat="true" Name="Normal" /><w:LsdException Locked="false" Priority="9" SemiHidden="false"UnhideWhenUsed="false" QFormat="true" Name="heading 1" /><w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 2" /><w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 3" /><w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 4" /><w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 5" /><w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 6" /><w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 7" /><w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 8" /><w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 9" /><w:LsdException Locked="false" Priority="39" Name="toc 1" /><w:LsdException Locked="false" Priority="39" Name="toc 2" /><w:LsdException Locked="false" Priority="39" Name="toc 3" /><w:LsdException Locked="false" Priority="39" Name="toc 4" /><w:LsdException Locked="false" Priority="39" Name="toc 5" /><w:LsdException Locked="false" Priority="39" Name="toc 6" /><w:LsdException Locked="false" Priority="39" Name="toc 7" /><w:LsdException Locked="false" Priority="39" Name="toc 8" /><w:LsdException Locked="false" Priority="39" Name="toc 9" /><w:LsdException Locked="false" Priority="35" QFormat="true" Name="caption" /><w:LsdException Locked="false" Priority="10" SemiHidden="false"UnhideWhenUsed="false" QFormat="true" Name="Title" /><w:LsdException Locked="false" Priority="1" Name="Default Paragraph Font" /><w:LsdException Locked="false" Priority="11" SemiHidden="false"UnhideWhenUsed="false" QFormat="true" Name="Subtitle" /><w:LsdException Locked="false" Priority="22" SemiHidden="false"UnhideWhenUsed="false" QFormat="true" Name="Strong" /><w:LsdException Locked="false" Priority="20" SemiHidden="false"UnhideWhenUsed="false" QFormat="true" Name="Emphasis" /><w:LsdException Locked="false" Priority="59" SemiHidden="false"UnhideWhenUsed="false" Name="Table Grid" /><w:LsdException Locked="false" UnhideWhenUsed="false" Name="Placeholder Text" /><w:LsdException Locked="false" Priority="1" SemiHidden="false"UnhideWhenUsed="false" QFormat="true" Name="No Spacing" /><w:LsdException Locked="false" Priority="60" SemiHidden="false"UnhideWhenUsed="false" Name="Light Shading" /><w:LsdException Locked="false" Priority="61" SemiHidden="false"UnhideWhenUsed="false" Name="Light List" /><w:LsdException Locked="false" Priority="62" SemiHidden="false"UnhideWhenUsed="false" Name="Light Grid" /><w:LsdException Locked="false" Priority="63" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Shading 1" /><w:LsdException Locked="false" Priority="64" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Shading 2" /><w:LsdException Locked="false" Priority="65" SemiHidden="false"UnhideWhenUsed="false" Name="Medium List 1" /><w:LsdException Locked="false" Priority="66" SemiHidden="false"UnhideWhenUsed="false" Name="Medium List 2" /><w:LsdException Locked="false" Priority="67" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 1" /><w:LsdException Locked="false" Priority="68" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 2" /><w:LsdException Locked="false" Priority="69" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 3" /><w:LsdException Locked="false" Priority="70" SemiHidden="false"UnhideWhenUsed="false" Name="Dark List" /><w:LsdException Locked="false" Priority="71" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful Shading" /><w:LsdException Locked="false" Priority="72" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful List" /><w:LsdException Locked="false" Priority="73" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful Grid" /><w:LsdException Locked="false" Priority="60" SemiHidden="false"UnhideWhenUsed="false" Name="Light Shading Accent 1" /><w:LsdException Locked="false" Priority="61" SemiHidden="false"UnhideWhenUsed="false" Name="Light List Accent 1" /><w:LsdException Locked="false" Priority="62" SemiHidden="false"UnhideWhenUsed="false" Name="Light Grid Accent 1" /><w:LsdException Locked="false" Priority="63" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1" /><w:LsdException Locked="false" Priority="64" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1" /><w:LsdException Locked="false" Priority="65" SemiHidden="false"UnhideWhenUsed="false" Name="Medium List 1 Accent 1" /><w:LsdException Locked="false" UnhideWhenUsed="false" Name="Revision" /><w:LsdException Locked="false" Priority="34" SemiHidden="false"UnhideWhenUsed="false" QFormat="true" Name="List Paragraph" /><w:LsdException Locked="false" Priority="29" SemiHidden="false"UnhideWhenUsed="false" QFormat="true" Name="Quote" /><w:LsdException Locked="false" Priority="30" SemiHidden="false"UnhideWhenUsed="false" QFormat="true" Name="Intense Quote" /><w:LsdException Locked="false" Priority="66" SemiHidden="false"UnhideWhenUsed="false" Name="Medium List 2 Accent 1" /><w:LsdException Locked="false" Priority="67" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1" /><w:LsdException Locked="false" Priority="68" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1" /><w:LsdException Locked="false" Priority="69" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1" /><w:LsdException Locked="false" Priority="70" SemiHidden="false"UnhideWhenUsed="false" Name="Dark List Accent 1" /><w:LsdException Locked="false" Priority="71" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful Shading Accent 1" /><w:LsdException Locked="false" Priority="72" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful List Accent 1" /><w:LsdException Locked="false" Priority="73" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful Grid Accent 1" /><w:LsdException Locked="false" Priority="60" SemiHidden="false"UnhideWhenUsed="false" Name="Light Shading Accent 2" /><w:LsdException Locked="false" Priority="61" SemiHidden="false"UnhideWhenUsed="false" Name="Light List Accent 2" /><w:LsdException Locked="false" Priority="62" SemiHidden="false"UnhideWhenUsed="false" Name="Light Grid Accent 2" /><w:LsdException Locked="false" Priority="63" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2" /><w:LsdException Locked="false" Priority="64" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2" /><w:LsdException Locked="false" Priority="65" SemiHidden="false"UnhideWhenUsed="false" Name="Medium List 1 Accent 2" /><w:LsdException Locked="false" Priority="66" SemiHidden="false"UnhideWhenUsed="false" Name="Medium List 2 Accent 2" /><w:LsdException Locked="false" Priority="67" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2" /><w:LsdException Locked="false" Priority="68" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2" /><w:LsdException Locked="false" Priority="69" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2" /><w:LsdException Locked="false" Priority="70" SemiHidden="false"UnhideWhenUsed="false" Name="Dark List Accent 2" /><w:LsdException Locked="false" Priority="71" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful Shading Accent 2" /><w:LsdException Locked="false" Priority="72" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful List Accent 2" /><w:LsdException Locked="false" Priority="73" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful Grid Accent 2" /><w:LsdException Locked="false" Priority="60" SemiHidden="false"UnhideWhenUsed="false" Name="Light Shading Accent 3" /><w:LsdException Locked="false" Priority="61" SemiHidden="false"UnhideWhenUsed="false" Name="Light List Accent 3" /><w:LsdException Locked="false" Priority="62" SemiHidden="false"UnhideWhenUsed="false" Name="Light Grid Accent 3" /><w:LsdException Locked="false" Priority="63" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3" /><w:LsdException Locked="false" Priority="64" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3" /><w:LsdException Locked="false" Priority="65" SemiHidden="false"UnhideWhenUsed="false" Name="Medium List 1 Accent 3" /><w:LsdException Locked="false" Priority="66" SemiHidden="false"UnhideWhenUsed="false" Name="Medium List 2 Accent 3" /><w:LsdException Locked="false" Priority="67" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3" /><w:LsdException Locked="false" Priority="68" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3" /><w:LsdException Locked="false" Priority="69" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3" /><w:LsdException Locked="false" Priority="70" SemiHidden="false"UnhideWhenUsed="false" Name="Dark List Accent 3" /><w:LsdException Locked="false" Priority="71" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful Shading Accent 3" /><w:LsdException Locked="false" Priority="72" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful List Accent 3" /><w:LsdException Locked="false" Priority="73" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful Grid Accent 3" /><w:LsdException Locked="false" Priority="60" SemiHidden="false"UnhideWhenUsed="false" Name="Light Shading Accent 4" /><w:LsdException Locked="false" Priority="61" SemiHidden="false"UnhideWhenUsed="false" Name="Light List Accent 4" /><w:LsdException Locked="false" Priority="62" SemiHidden="false"UnhideWhenUsed="false" Name="Light Grid Accent 4" /><w:LsdException Locked="false" Priority="63" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4" /><w:LsdException Locked="false" Priority="64" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4" /><w:LsdException Locked="false" Priority="65" SemiHidden="false"UnhideWhenUsed="false" Name="Medium List 1 Accent 4" /><w:LsdException Locked="false" Priority="66" SemiHidden="false"UnhideWhenUsed="false" Name="Medium List 2 Accent 4" /><w:LsdException Locked="false" Priority="67" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4" /><w:LsdException Locked="false" Priority="68" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4" /><w:LsdException Locked="false" Priority="69" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4" /><w:LsdException Locked="false" Priority="70" SemiHidden="false"UnhideWhenUsed="false" Name="Dark List Accent 4" /><w:LsdException Locked="false" Priority="71" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful Shading Accent 4" /><w:LsdException Locked="false" Priority="72" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful List Accent 4" /><w:LsdException Locked="false" Priority="73" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful Grid Accent 4" /><w:LsdException Locked="false" Priority="60" SemiHidden="false"UnhideWhenUsed="false" Name="Light Shading Accent 5" /><w:LsdException Locked="false" Priority="61" SemiHidden="false"UnhideWhenUsed="false" Name="Light List Accent 5" /><w:LsdException Locked="false" Priority="62" SemiHidden="false"UnhideWhenUsed="false" Name="Light Grid Accent 5" /><w:LsdException Locked="false" Priority="63" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5" /><w:LsdException Locked="false" Priority="64" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5" /><w:LsdException Locked="false" Priority="65" SemiHidden="false"UnhideWhenUsed="false" Name="Medium List 1 Accent 5" /><w:LsdException Locked="false" Priority="66" SemiHidden="false"UnhideWhenUsed="false" Name="Medium List 2 Accent 5" /><w:LsdException Locked="false" Priority="67" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5" /><w:LsdException Locked="false" Priority="68" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5" /><w:LsdException Locked="false" Priority="69" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5" /><w:LsdException Locked="false" Priority="70" SemiHidden="false"UnhideWhenUsed="false" Name="Dark List Accent 5" /><w:LsdException Locked="false" Priority="71" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful Shading Accent 5" /><w:LsdException Locked="false" Priority="72" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful List Accent 5" /><w:LsdException Locked="false" Priority="73" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful Grid Accent 5" /><w:LsdException Locked="false" Priority="60" SemiHidden="false"UnhideWhenUsed="false" Name="Light Shading Accent 6" /><w:LsdException Locked="false" Priority="61" SemiHidden="false"UnhideWhenUsed="false" Name="Light List Accent 6" /><w:LsdException Locked="false" Priority="62" SemiHidden="false"UnhideWhenUsed="false" Name="Light Grid Accent 6" /><w:LsdException Locked="false" Priority="63" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6" /><w:LsdException Locked="false" Priority="64" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6" /><w:LsdException Locked="false" Priority="65" SemiHidden="false"UnhideWhenUsed="false" Name="Medium List 1 Accent 6" /><w:LsdException Locked="false" Priority="66" SemiHidden="false"UnhideWhenUsed="false" Name="Medium List 2 Accent 6" /><w:LsdException Locked="false" Priority="67" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6" /><w:LsdException Locked="false" Priority="68" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6" /><w:LsdException Locked="false" Priority="69" SemiHidden="false"UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6" /><w:LsdException Locked="false" Priority="70" SemiHidden="false"UnhideWhenUsed="false" Name="Dark List Accent 6" /><w:LsdException Locked="false" Priority="71" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful Shading Accent 6" /><w:LsdException Locked="false" Priority="72" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful List Accent 6" /><w:LsdException Locked="false" Priority="73" SemiHidden="false"UnhideWhenUsed="false" Name="Colorful Grid Accent 6" /><w:LsdException Locked="false" Priority="19" SemiHidden="false"UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis" /><w:LsdException Locked="false" Priority="21" SemiHidden="false"UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis" /><w:LsdException Locked="false" Priority="31" SemiHidden="false"UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference" /><w:LsdException Locked="false" Priority="32" SemiHidden="false"UnhideWhenUsed="false" QFormat="true" Name="Intense Reference" /><w:LsdException Locked="false" Priority="33" SemiHidden="false"UnhideWhenUsed="false" QFormat="true" Name="Book Title" /><w:LsdException Locked="false" Priority="37" Name="Bibliography" /><w:LsdException Locked="false" Priority="39" QFormat="true" Name="TOC Heading" /></w:LatentStyles></xml><![endif]><![if gte mso 10]><style> Style Definitions */table.MsoNormalTable{mso-style-name:"Table Normal";mso-tstyle-rowband-size:0;mso-tstyle-colband-size:0;mso-style-noshow:yes;mso-style-priority:99;mso-style-parent:"";mso-padding-alt:0in 5.4pt 0in 5.4pt;mso-para-margin-top:0in;mso-para-margin-right:0in;mso-para-margin-bottom:10.0pt;mso-para-margin-left:0in;line-height:115%;mso-pagination:widow-orphan;font-size:11.0pt;font-family:"Calibri","sans-serif";mso-ascii-font-family:Calibri;mso-ascii-theme-font:minor-latin;mso-hansi-font-family:Calibri;mso-hansi-theme-font:minor-latin;mso-bidi-font-family:"Times New Roman";mso-bidi-theme-font:minor-bidi;}</style><![endif]>

Thread Tools
Search this Thread

Contact Us - Manage Preferences Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.