OS 160 FX Muffler Help
 

I have a muffler for the OS 160 FX, but there are no baffles in it. I am not sure if there are more than one, or what they even look like.
If any of you that have the ability to remove the baffle, measure hole locations (eg... six 1/8" holes equally spaced, and one 1/2" hole in center), and plate thickness, please let me know so that I can manufacture my own.
OS does not sell these separate of the muffler.

Thanks in advance,
Greg

I received a reply in another RC forum. I'll put the size of the baffle here so any future searches for the baffle size will get an answer.
This baffle is for the OS 855 muffler used for OS 160 FX and other OS engines.
The baffle is installed between the back part and the center shiny part of the muffler.
The plate is 2mm thick, 47mm outside, with a 14mm hole in the center.

Greg