RCU Forums - Evolution Flywheel Removal

RCU Forums (https://www.rcuniverse.com/forum/)

- Glow Engines (https://www.rcuniverse.com/forum/glow-engines-114/)

- - Evolution Flywheel Removal (https://www.rcuniverse.com/forum/glow-engines-114/1451826-evolution-flywheel-removal.html)

LearjetMech

01-21-2004 08:21 AM

Evolution Flywheel Removal

Anyone know for sure if you can remove the flywheel from an Evo .46 without messing up the drive washer? Or am I stuck with having to buy a new drive?

twostroker

01-21-2004 03:16 PM

RE: Evolution Flywheel Removal

Comes off no problem. Yes I have done it.
Tim

proptop

01-21-2004 03:33 PM

RE: Evolution Flywheel Removal

Yeah, it's just a press fit.

LearjetMech

01-21-2004 06:56 PM

RE: Evolution Flywheel Removal

Do I need to use heat or not?

proptop

01-21-2004 11:52 PM

RE: Evolution Flywheel Removal

I just rested it across the jaws of a vice, prop drive facing down between them, and used a socket the same size as the drive. A few taps w/ a plastic mallet and it was outa there...No heat req.

All times are GMT -8. The time now is 04:11 PM.