RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Glow Engines (https://www.rcuniverse.com/forum/glow-engines-114/)
-   -   Engine Test Stands (https://www.rcuniverse.com/forum/glow-engines-114/3162512-engine-test-stands.html)

Young-RCPilot 07-13-2005 10:15 AM

Engine Test Stands
 
Does anyone know any good engine test stands out their, I was going to buy the VMAR one but with all the people saying there engines flew off while running them I think I will pas on them. Also does anyone have plans of ones that they made there self I will be running a Saito 100 in one.

Hobbsy 07-13-2005 10:52 AM

RE: Engine Test Stands
 
1 Attachment(s)
Here is the best one a PSP.

w8ye 07-13-2005 02:11 PM

RE: Engine Test Stands
 
American Hobby Products makes a nice one.

They have three sizes and then there are ones that measure torque and thrust.

No web site They advertise in R/C Modeler

Mail order only.

I have the Jumbo and it was 39.95. I just ran my Saito 150 on it last week but I've also used it with my Saito 100's, 91's etc.

The Jumbo will not fit 46 or smaller size engines.

I have a Carl Goldburg for that. http://www.carlgoldbergproducts.com/stand.htm it's not safe for anything over a 61.

Enjoy,

Jim

av8r4aa 07-13-2005 03:22 PM

RE: Engine Test Stands
 
1 Attachment(s)
I have the PSP brand.
It BY FAR exceedes all others.
Mine is mounted to a 2X6 on top of a metal saw horse.
It has about 4 coats of epoxy and sanded and painted with Kand B Orange.
If you are going to be in this hobby a while buy the best.
You can give it to your grandchildren.
It folds up nicely and lives in the house when I am not using it

Richard L. 07-13-2005 04:26 PM

RE: Engine Test Stands
 
I second (or third) the PSP engine test stand. Very high quality and easy to use.

doubledee 07-14-2005 08:57 AM

RE: Engine Test Stands
 
Where can I get a PSP engine test stand?

Richard L. 07-14-2005 09:21 AM

RE: Engine Test Stands
 
Here you go: [link]http://www.pspmfg.com/[/link]

HarryJ 07-14-2005 09:48 AM

RE: Engine Test Stands
 
Check with RC Showcase, they have a larger one for the large gas engines. http://rcshowcase.com/

Harry

STG 07-14-2005 07:13 PM

RE: Engine Test Stands
 
1 Attachment(s)
Just broke my SA100 in and thew together one with some stuff I had laying around--used wood screws to put it together quick.




jessiej 07-14-2005 08:25 PM

RE: Engine Test Stands
 
For many years (decades) I have used a home made oak test stand. Recently however, I purchased one of the PSP stands and have been highly pleased with it.

jess

conchohoncho 07-15-2005 08:20 PM

RE: Engine Test Stands
 
You can't go wrong with PSP products. They are by far the best. Remember, you get what you pay for. Buy the best and only cry once.
Richard


All times are GMT -8. The time now is 09:06 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.