Need a 3.5" spinner to fit O.S. 1.60 with 18x6w APC
 

Hey all,

Does anyone know of any 3.5" spinners that'll clear an 18x6w APC?

Will a menz cut do it? Tru turn doesn't make any of their "w" spinners in that diameter, and I'd rather not start hacking and balancing a 50 dollar spinner.
Any ideas?

Thanks

RE: Need a 3.5" spinner to fit O.S. 1.60 with 18x6w APC
 

did you talk or e-mail tru turn, i believe they will cut one to fit for ya;)

RE: Need a 3.5" spinner to fit O.S. 1.60 with 18x6w APC
 

Dave Brown has 3 1/2 inch spinners cut for bigger props. go to his site and see if one will work - or e-mail him to gat one custom cut for this prop. he charged me $5 to custom cut a spinner.

ed

RE: Need a 3.5" spinner to fit O.S. 1.60 with 18x6w APC
 

Thanks,

I remembered that Dave brown had em after I posted the question :D

RE: Need a 3.5" spinner to fit O.S. 1.60 with 18x6w APC
 

3 1/2 " Ultimate spinner from Tru-Turn requires no mods. Don't quote me on the part # here. TRU 3552.

RE: Need a 3.5" spinner to fit O.S. 1.60 with 18x6w APC
 

Just call tru turn
281-479-9600
they cut what ever you need if they don't have it for 9.50