Recoder circuit board for DIY pulse proportional
#1
Thread Starter
Recoder circuit board for DIY pulse proportional
For those of you who have purchased Phil G re-coder PICs for Pulse Proportional emulation, Crist has made and sent me some circuit boards which greatly simplify the task of wiring up the re-coder PIC to a H-Bridge driver board and servo plugs. This universal board will work for rudder only and galloping ghost, and allow you to use a variety of options as far as battery voltages for the actuator. The re-coder circuit with driver can be used with any original magnetic actuator (Adams style) or motorized actuator (Rand/Controlaire/Tobe) using the PC board as it has several options.
We designed the board so if you have a Phil G galloping ghost PIC, it can be used with a rudder only actuator by adding the elevator servo plug. Feel free to contact me for details.
Keep 'em flapping.
We designed the board so if you have a Phil G galloping ghost PIC, it can be used with a rudder only actuator by adding the elevator servo plug. Feel free to contact me for details.
Keep 'em flapping.