Miss America Wing and Stabilizer incidence
08-20-2005, 03:47 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2005
Location: jamestown, NC
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Miss America Wing and Stabilizer incidence
I built an oldtimer, MISS AMERICA, free flight model converted for RC. Plans are from MODEL AVIATION. It is not possible to determine the stabilizer incidence from the plans. I would appreciate very much information on the stabilizer and wing incidence for this model.
08-20-2005, 04:22 PM
#2
My Feedback: (14)
Join Date: Feb 2004
Location: Arlington,
TX
Posts: 1,467
Likes: 0
Received 0 Likes
on
0 Posts
RE: Miss America Wing and Stabilizer incidence
Mine is set at zero zero and flys with no drama. I did move the wheels back closer to the cg so that it had better ground handling.
ORIGINAL: errico
I built an oldtimer, MISS AMERICA, free flight model converted for RC. Plans are from MODEL AVIATION. It is not possible to determine the stabilizer incidence from the plans. I would appreciate very much information on the stabilizer and wing incidence for this model.
I built an oldtimer, MISS AMERICA, free flight model converted for RC. Plans are from MODEL AVIATION. It is not possible to determine the stabilizer incidence from the plans. I would appreciate very much information on the stabilizer and wing incidence for this model.
