Go Back  RCU Forums > RC Airplanes > Golden Age, Vintage & Antique RC
Reload this Page >

Vintage ducted fan (1975)

Notices
Golden Age, Vintage & Antique RC Want to discuss some of those from the golden age, vintage rc planes or even an old classic antique vintage rc planes, radios, engines, etc? This is the place for you. Enjoy!

Vintage ducted fan (1975)

Old 01-20-2006, 01:01 AM
  #1  
subarubrat
Thread Starter
My Feedback: (1)
 
subarubrat's Avatar
 
Join Date: Apr 2005
Location: Remington, VA
Posts: 690
Likes: 0
Received 0 Likes on 0 Posts
Default Vintage ducted fan (1975)

I posted this in the ducted fan forum and it resulted in a total lack of interest. They seem to be more interested in the specs of the latest turbine fuel fitting. I have 3 turbine engines and they are all fine and good, but they fire me up half as much as the first steps that paved the way. Beyond that, I think that the greatest inovations in R/C came in the mid 70' through late 80s. I say that because ducted fans went from tin sheet rotors on 049s in stick and tissue models into Byron Originals with retracts and .90 sizes engines, RC systems went from single channel to 9 channel computer radios. And most importantly, allot of original ideas were tried. Some of them just did not have the right gear available at the time to make them work as imagined (1/2a ducted fan) or the right functionality was available but the gear was just too heavy. However many of the innovations of that era worked great and aren't given their due today. In my opinion the first commercial ducted fan series suitable for R/C was the Kress RK series, the RK40 most of all, and the first viable airframe was the Ziroli HE162. The follow on kits produced by Midwest like the jetster 20 were worthy succesors and great flyers.

I rounded up a HE162 Ziroli produced by Midwest in 1975 to go with my RK40 built by Kress and I am building them now. The original flew well with the heavier gear of the day and a pattern .40 engine. With a modern .45 Df engine and lightweight materials and R/C system you move the weight down a pound or so and the thrust up a pound or so and you go from a nice sport plane like thrust to weight ratio to a solid 1:1 or better ratio. I love vintage R/C and I think the Midwest/Ziroli HE162 is allot like that first Sabre Jet in the Confederate Air Force.

So far I have framed up the fuse, built the majority of the fan unit, and I am beginning to sheet the wing.









Old 01-20-2006, 12:54 PM
  #2  
grumpE
Senior Member
My Feedback: (6)
 
grumpE's Avatar
 
Join Date: Sep 2003
Location: omaha, NE
Posts: 389
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

A blast from the past!

I was a kid in the 70's and poured over second hand RC mags from my cousins. We didn't have the means to do much more than the small tissue and rubber band stuff. I very vivedly recall adds for that kit. It looked like something out of star trek back in the day.

Looking forward to watching this one.

Eric
Old 01-20-2006, 01:19 PM
  #3  
8178
My Feedback: (17)
 
8178's Avatar
 
Join Date: May 2004
Location: Atlanta, GA
Posts: 4,342
Likes: 0
Received 1 Like on 1 Post
Default RE: Vintage ducted fan (1975)

subarubrat

Looking forward to more detailed posts on building and flying the DF. Keep them coming we love this stuff. Glad to know that there are a few people left that know how to build stuff.
Old 01-22-2006, 09:10 PM
  #4  
subarubrat
Thread Starter
My Feedback: (1)
 
subarubrat's Avatar
 
Join Date: Apr 2005
Location: Remington, VA
Posts: 690
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

Wing is sheeted and the fan mounts are in place. I have also run the servo wire.



Old 01-24-2006, 12:51 PM
  #5  
Ed Couch
Senior Member
 
Join Date: Oct 2004
Location: North Richland Hills, TX
Posts: 149
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

I still have one hanging in my garage built by a friend who has long gone under. Found this particular model in a Pawn Shop and realized whoes it was so I picked it up never to be flown as it was missing a scale pod with the RK40 mounted. This was also the first successful fan model I ever built from Nicks original plans with a rip snortin full blown race K/B 40 with straight pipe. On 40 percent nitro it required a new plug every flight and was dead stick most of the time on final. Loud and sounded like a mad 40 size pylon racer from start to finish of flight. The midwest kits were heavy but quite flyable with gear at that time, a remake would be a lot of fun. Changed out the RK-40 to a Scozzi Fan and flew it until sold several years and a few Violet Scooters (A4s) later. Retired to electric indoors after 26 years of fans and turbines, never looked back but it was a great time. Turbines are ok but they took the fun out of jets at least for me due to overall cost. Still have five or six hanging from ceiling ready to go if bug ever bites again. ed
Old 01-24-2006, 01:19 PM
  #6  
Gremlin Castle
My Feedback: (14)
 
Join Date: Feb 2004
Location: Arlington, TX
Posts: 1,467
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

Ed, you could repower Wanda with a small fan and turn her into a blowfish.

Ross
Old 01-24-2006, 04:37 PM
  #7  
subarubrat
Thread Starter
My Feedback: (1)
 
subarubrat's Avatar
 
Join Date: Apr 2005
Location: Remington, VA
Posts: 690
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

I just finished skinning the fan unit with the 1/64th ply and got the wingtips glued on and cut to shape. I have also been pushing hard to get my 1/2a design contest entry done so I am progressing slowly on this one. And of course this week I am working the next 4 days so nothing will get done.

I was just thinking how odd it is that R/C ducted fan has reached the classic/vintage era. When I was a kid in the late 70's and early 80's I saw Mustangs and Coursairs fly at OshKosh and other shows (of course they really flew them hard back them and now they baby them around). The early jets now are just as old or older than the WWII warbirds were then. The same is true of models, the early R/C DF planes are now 30 years old and in that catagory.
Old 01-31-2006, 11:20 AM
  #8  
subarubrat
Thread Starter
My Feedback: (1)
 
subarubrat's Avatar
 
Join Date: Apr 2005
Location: Remington, VA
Posts: 690
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)






Old 01-31-2006, 07:01 PM
  #9  
EASYTIGER
Banned
My Feedback: (119)
 
Join Date: Dec 2001
Location: nyc, NY
Posts: 7,676
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

Lookin' great!
Old 01-31-2006, 10:34 PM
  #10  
subarubrat
Thread Starter
My Feedback: (1)
 
subarubrat's Avatar
 
Join Date: Apr 2005
Location: Remington, VA
Posts: 690
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

After all these years in the hobby nothing makes me groan more than the three little words, "sand to shape". I hate taking at a big solid block of balsa and trying to sand a symetrical form out of it. I am not done yet, but the rough shape is there for the nose and top block and I got some planking done.

Old 01-31-2006, 10:54 PM
  #11  
EASYTIGER
Banned
My Feedback: (119)
 
Join Date: Dec 2001
Location: nyc, NY
Posts: 7,676
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

Get some life-changing Permagrit tools!
Those Kamdax stands are handy, huh?
Old 02-03-2006, 08:42 AM
  #12  
Demon-Leather
Senior Member
My Feedback: (10)
 
Join Date: Dec 2001
Location: Rex, NC
Posts: 124
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

Those "Jet-Guys" If you don't have a $5K turbine, and drive a new Boxter, they won't give the time of day to us "financially challenged"... but, being an old Codger, and still extremely high-winded, I just couldn't let you gloss-over all the improvements that made the 70's & 80's such a banner hit for you. Yes, they started as bent aluminum impellers that when stressed would literally "fly off the handle" at You, but by '58 the prim & proper English were getting a well-engineered handle on the DF situation. By '59 they were producing very nice nylon propellors for the English diesels and putting them in some very nice and rather scale looking Df F/F models. True,.. You had to wait till the late 70's for radio equipment to just begin to fit something that small... but the DF technology was there and blooming. I have a lot of the old DF plans and there were some VERY nice ones! Not stick & tissue, but well designed aircraft models. I think the oldest one I have is a VERY scale Grummen Cougar from M.A,N. plans dated 1957. Yeah, it was a D.I.Y. bent aluminum impeller, mounted on the "then-new" Thermal Hopper Cox... but the plane is a work of engineering art. Veron had some nice delta models even (they were like the English version of Berkley) I have Nick's Salamander plans... I think they were done before the kit. If You have a mishap (heaven forbid) the plans have a built up wing. so You can replace the wing without a foam core. I reduced it for small micro EDF, but always keep the origional safe. Since I'm a compulsive Postoholic, and have no life, I'm posting a few photos to show what I mean. Your Salamander looks Great!..Can't wait for some in-flight photos! Ok,.. I'm done cluttering up your thread, I just can't help myself sometimes
Don't tell me about "sand & shape"... I just got done making canopy plugs for a TopFlite Top Dawg & Roarin'20....My hands are STILL numb... [] Bob
Attached Thumbnails Click image for larger version

Name:	Hf97610.jpg
Views:	115
Size:	104.9 KB
ID:	401083   Click image for larger version

Name:	Bw73242.jpg
Views:	112
Size:	109.2 KB
ID:	401084   Click image for larger version

Name:	Hm24208.jpg
Views:	122
Size:	79.0 KB
ID:	401085   Click image for larger version

Name:	Gz76078.jpg
Views:	123
Size:	68.0 KB
ID:	401086  
Old 02-03-2006, 10:57 AM
  #13  
subarubrat
Thread Starter
My Feedback: (1)
 
subarubrat's Avatar
 
Join Date: Apr 2005
Location: Remington, VA
Posts: 690
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

Funny you should mention the Boxster, we are finally about to say farewell to ours after a few years of use. The wife bought it

because it was "cute" and "spiffy" that is her criteria. One thing I have found is that there is often a certain unwarranted

sense of self importance and a lack of appreciation for anything "less" in certain people. And when those people gather in groups

and reassure each other of their status it often becomes unbearable. Car groups are a great example. I cannot attend Porsche or

Lambo owners groups because there is such a lack of honesty and a tension of ego. The Subaru groups on the other hand are so much

more social and relaxed. To sum it up the Subaru attitude is that our STI out performs most Porsches but there are a few over

$100k that are better performers and that is a nice position to be in. The Porsche attitude is that it's a Porsche so it's

better, period. The turbine revolution has exacerbated that problem in model aircraft. I have a turbines myself, they are an

absolute marvel no doubt, but that doesn't mean that the ducted fans are dead and that at 1/8th the price that they aren't great

performers for the money. They were great fun and very flyable 5 years ago before turbines became widely available and they didn't loose that just because turbines exist. There also seems to be no appreciation for revolutionary steps in the path that lead to the turbine being available. I did oversimplify the history of DF prior to the Ziroli/Kress era (wasn't trying to write a retrospective) but there is no denying that kit brought practical DF R/C to the hobby.
Old 02-03-2006, 02:24 PM
  #14  
Demon-Leather
Senior Member
My Feedback: (10)
 
Join Date: Dec 2001
Location: Rex, NC
Posts: 124
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

The Boxter was a no-brainer... turbines & boxters go together. And you're right... the 70's & 80's were the golden years for D/F development... I just had to say something about the "Pioneer Era". If you are flying turbines, You probably won't need it, but in case you bend the kit I have the pre-kit plans if you ever need to replace anything Bob
Old 02-03-2006, 03:43 PM
  #15  
subarubrat
Thread Starter
My Feedback: (1)
 
subarubrat's Avatar
 
Join Date: Apr 2005
Location: Remington, VA
Posts: 690
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

As I built it I traced and copied all the bulheads and sheets and the crutch. Also saved the saddles and such just in case. As I said about the Boxster, that is the wife's car, it is one of those cars like the Miata or new Beatle, a chick car. That car has nothing to do with my hobby preferences. My choice is the STI or when I don't have to stop anywhere, the Diablo. People either assume that the car is public domain and crawl on it or do their best to smack it with their car door because their mad at the world. But back to the jets. I don't plan on buying any more turbines for a while, I think they are way overpriced for what they are and are selling mainly to early adopters. I just couldn't resist such a technical marvel. Let's face it though, these turbines out now are the 2nd generation and once they hit MASS production (IE the Chinese start knocking them out) we will see sub $1000 turbines before too long. Look at the Mini helis, the Ikarus Piccolo was very overpriced and once you added in the board, it was $600 plus. Now you can buy better flying helis for around $100. It sold because of the novelty factor. Turbines will probably follow the same pattern and when they hit under $1000 I will probably take more interest in them.
Old 02-03-2006, 06:12 PM
  #16  
EASYTIGER
Banned
My Feedback: (119)
 
Join Date: Dec 2001
Location: nyc, NY
Posts: 7,676
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

I have a Chinese turbine, it does indeed run, yes, you are going to see prices drop soon...
The Boxter is the Porsche with panties, my friend has one, we never stop making fun of him! And he always needs a ride to the field, as he can't even fit a 1/2a plane inside...

Ol' P.E. Norman, who did those Veron DF kits, flew RC DF all the way back then, too. Single channel!
Old 02-04-2006, 05:06 PM
  #17  
balsaworks
Senior Member
 
balsaworks's Avatar
 
Join Date: Dec 2004
Location: Stockholm, SWEDEN
Posts: 157
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)



Actually it was Phil Smith who designed the Veron range of ducted fan free flight kits.
He designed a whole bunch of models for Veron, and can still supply copies of most of them, at very modest prices:

Phil Smith
32 Verwood Crescent
Southbourne
Bournemouth
Dorset BH6 4JE
United Kingdom

There is a wonderful overview of some of the early British efforts to produce flying jet models at this site:
http://jetex.org/archive/jetxfiles/200312.shtml

Tomas H.


Terrific web site, well worth a book mark!
Old 02-04-2006, 07:58 PM
  #18  
EASYTIGER
Banned
My Feedback: (119)
 
Join Date: Dec 2001
Location: nyc, NY
Posts: 7,676
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

Right you are about Smith versus Norman, but I do beleive it WAS Norman who flew RC DF back then...

Isin't that a great site?
Old 02-05-2006, 04:49 AM
  #19  
balsaworks
Senior Member
 
balsaworks's Avatar
 
Join Date: Dec 2004
Location: Stockholm, SWEDEN
Posts: 157
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

Yes I´m sure you´re right, P E Norman was one of the famous pioneers of DF.
His designs were sturdy, heavy, high-powered, and fast, probably not well suited for kitting at the time.
Old 02-05-2006, 04:17 PM
  #20  
F106A
My Feedback: (2)
 
F106A's Avatar
 
Join Date: Apr 2002
Location: Clifton, NJ
Posts: 1,856
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

subarurat:

I have to take exception to your generalization of turbine modelers. Your generalizations are so typical of Internet chatter with little basis in fact. Before I ever got into jets, I started asking questions and almost without exception I found jet modelers to be very open and willing to answer questions and talk about jets. I’m curious, have you ever gone to a jet meet and talk to any of the pilots? Where they rude or standoffish? Of course there a few turbine pilots with egos, just like any other facet of the hobby such as IMAC, pattern, scale, etc, but that doesn't mean that all modelers in that part of the hobby are that way.

The other Internet bit of wisdom is Bob Violett is very standoffish and doesn’t talk to anyone other than his close friends. I went to Fla 3 years ago and asked if I could tour his facility; they said fine and gave me the cook’s tour. As I was about to leave, Bob came out and talked jets to me for 20 minutes, answering every question and giving me some suggestions on how to get started. He knew I was there to look and not buy, but he still spent some time with me.

Another Internet theme is only rich guys can afford turbine’s, which is bull. I’m sure there are some modelers who cannot afford one, but the vast majority just doesn’t think it’s worth it. There’s no one on more of a budget than me, but I bought one two years ago. I got the money by not taking a vacation and getting paid instead of taking the time off. I used that money to buy a 2300. So it cost me 3 weeks of extra work that year to buy a turbine. Big deal!

I can’t afford a composite model, so I scratched built a FACET 2300. I got a plan set, foam wing cores and l/g from Kerry (before he offered the semi-kit). Half of the wood was from stuff laying around that we all accumulate, the rest I bought. I’ve got about $300 in the airframe. Of course you have to buy digital servos and such, but you’d have to buy those for any high performance model. I probably have about $3200 in the FACET, $2500 of which is the engine, so you can fly turbines on a budget, if you really want to.

Oh, I drive a 10 year old Sable station wagon, so there goes another Internet gem.

As for the Chinese lowering prices, well, we’ll see. Right now the JJ is a DIY project. If you like to tinker, it’s the engine for you. If you just want to go fly, look elsewhere. I’m not sure the market is much bigger than it is now to cause lower prices based on volume. I’ve never had anyone come up to me and say they’d get into turbines if they were cheaper. They like the technology but aren’t really interested in getting involved, but that’s just my experience, others may have had different comments.
BRG,
Jon
Old 03-29-2008, 04:04 PM
  #21  
houstontexas02
Junior Member
My Feedback: (2)
 
Join Date: Mar 2008
Location: houston, TX
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

dont know what this is but i found it in my dads attic when cleaning up...
J.J scozzi inc. .40 ducted fan turb -ax 1
Attached Thumbnails Click image for larger version

Name:	Qo41353.jpg
Views:	157
Size:	79.1 KB
ID:	916737  
Old 03-29-2008, 08:40 PM
  #22  
proptop
My Feedback: (8)
 
proptop's Avatar
 
Join Date: Oct 2002
Location: Rome, NY
Posts: 7,036
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

That's an early Turbax I
I've been looking for something like that...if you're interested in selling it, please PM me...
Old 03-30-2008, 11:07 PM
  #23  
Roary m
My Feedback: (67)
 
Join Date: Nov 2002
Location: lancaster, CA
Posts: 731
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

If I can figure out how to post pics, I'll post mine. Have an already built 162 with a K&B 7.5 with a Turbax unit. Flies well but it is heavy at around 9 lbs. Just scored a FanJett 50 with a Turbax attached so hopefully it'll get more punch on the go. Mine is rigged with a nose brake tied to down elevator.
Old 03-31-2008, 05:01 PM
  #24  
The Ghost
 
The Ghost's Avatar
 
Join Date: Mar 2004
Location: UlladullaNSW, AUSTRALIA
Posts: 1,846
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Vintage ducted fan (1975)

Hi All
Subarubrat you have inspired me and I will get out my Byron F-16 (18 years old) and may be I may finish it and get it going, and fly it.

Cheers
Attached Thumbnails Click image for larger version

Name:	Da83586.jpg
Views:	149
Size:	50.1 KB
ID:	918648  
Old 04-04-2008, 06:23 PM
  #25  
Mike Emilio
Senior Member
 
Join Date: Mar 2003
Location: TorontoOntario, CANADA
Posts: 800
Likes: 0
Received 1 Like on 1 Post
Default RE: Vintage ducted fan (1975)

ORIGINAL: subarubrat
, , , , , In my opinion the first commercial ducted fan series suitable for R/C was the Kress RK series, the RK40 most of all, and the first viable airframe was the Ziroli HE162. The follow on kits produced by Midwest like the jetster 20 were worthy succesors and great flyers.

I rounded up a HE162 Ziroli produced by Midwest in 1975 to go with my RK40 built by Kress and I am building them now.
, , , ,
Stumbled on this thread.
I bought 3 of those fan units, in the box, back in the 70's.
I put two of them in a really huge Avro Arrow, and the third kit I kept as a spare.

The boxes were basically black, with a picture of the red painted engine on front.
I sold the last complete kit that I had 2 years ago at a local swap meet, mint in-the-box.

Just a note: They were not by Kress.

They were by Midwest, with the Midwest logo top right corner.
If memory serves me, I believe there was also the name of a modeller on the assembly instructions.

The product name was actually - Axiflo

There were two sizes, Axiflo RK-20, and the Axiflow RK-40

I believe sometime later, Midwest sold out the Axiflo line to Kress. Kress discontinued the thick card material that was used for the outer shell, replacing it with some type of polycarbonate material.

Kress kept the orignal Midwest Axiflow fan impellers in stock for a long time, and used them with his own polycarbonate outer shell.

The last I recall Kress was also selling out, and Kress-jets.com doesn't even come up anymore.

= - Last entry on the Kress web site -

Kress Jets company is for sale.
Inquire - 845-594-5648 John Kress

Robert W. Kress
11/16/1929 - 3/14/2007
Attached Thumbnails Click image for larger version

Name:	Om32908.jpg
Views:	139
Size:	54.1 KB
ID:	921652  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.