GNAT
#1
Senior Member
Thread Starter
Join Date: Jan 2003
Location: BARNWELL,
SC
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
GNAT
I built this from a plan off Dave Fritzke's web site. It was there a couple of years ago but is gone now. Originally for Cox TD .010 and rudder only, I have it with throttle (Feigao 12mm brushless, 2 cell LiPo, GWS 3X2 prop). Came out at 3.2 .oz and is fun to fly. It shows an 8" top wing and says to clip it down to 7" as test flight prove it ok. I started with 7" and it flys fine.
#2
Senior Member
Join Date: Jan 2005
Location: Rio Rancho, NM
Posts: 421
Likes: 0
Received 0 Likes
on
0 Posts
RE: GNAT
Can you scan those plans an post them here? I tried something small like that a while back, but didn't have a lot of luck with it. That looks like it would be fun
John
John