Single channel relays needed
 

Old Timers: A buddy in England is sending me four pc boards for the Kraft receiver...you know, the single channel one with a 6007 and some transistors and a 5K Jemco (I think it was that brand) relay. I have two 6007 tubes new in the box and I will have two boards surplus to anyone who really wants to build it..I will furnish the article and such to build it..freebies..no charge.......BUT..I NEED at least 2 of those 5K ohm relays. I thought I had some but the only one I had left was bad..burned out coil. I have a transmitter and will need to find an escapement. Might even try it in an old Esquire or something like that...but will show it at a Club meeting...most of the members don't even know what pulse proportional or reeds was , much less single channel.
Regards to all, especially old timers...
Frank Schwartz in Hendersonville TN fast approaching 80 years...70 of them building and flying model airplanes...happiness for sure!!!!!

RE: Single channel relays needed
 

They will really go nuts as yoou show them how you tuned that radio out at the field.

RE: Single channel relays needed
 

Frank,
I had the wrong tube you needed... let me look for coil and escapement.......... that
is if the thought does not "escape me" ! ;)
Don=Basehor, Ks

RE: Single channel relays needed
 

Don: Don't feel bad. I have some real "senior moments" myself...guess my memory banks are pretty full...hard to access information quickly sometimes....ah, well.......