GP Supersportster 60
#1
Senior Member
Thread Starter
Join Date: Sep 2006
Location: Bradenton,
FL
Posts: 2,057
Likes: 0
Received 0 Likes
on
0 Posts
GP Supersportster 60
Looking forward to build. Can I use preformed alum. landing gear,( my landings sometimes are hard) Also, would it be too much motor to put a Super-Tigre .75 ( I have one just waiting) I figure if I get the CG right it wouldn't matter. I don't have to run full throtle..Ha!
#3
Senior Member
Join Date: Dec 2001
Location: Rowlett,
TX
Posts: 1,309
Likes: 0
Received 0 Likes
on
0 Posts
RE: GP Supersportster 60
I built mine with a fiberglass Dubro landing gear mounted right in front of the wing saddle and it worked great.
The Balsa is thick in this area so I thinned it and added aircraft ply to replace the Balsa I cut out.
I never had any problems associated with this mod.
I had a Magnum 91 four stroke on the plane and I did not feel like it was over powered, I would think the 75 two stroke would fly it very nicely.
Here are a couple of pictures of what it looked like http://www.rcuniverse.com/gallery/ga...memberId=24522
The Balsa is thick in this area so I thinned it and added aircraft ply to replace the Balsa I cut out.
I never had any problems associated with this mod.
I had a Magnum 91 four stroke on the plane and I did not feel like it was over powered, I would think the 75 two stroke would fly it very nicely.
Here are a couple of pictures of what it looked like http://www.rcuniverse.com/gallery/ga...memberId=24522