lipoly
 

Anyone using lipo's from raiden tech????

RE: lipoly
 

Not this one either, but you could check out the new Kokams at Towerhobbies. They have 30 C continuous and 60 C burst. Should be great for many uses, helis, planes, cars, whatever.

RE: lipoly
 

What size lipoly 11.1v 10c 800
or 11.1v 10c 1250 not sure on the 10c

RE: lipoly
 

OOps, spoke too soon. The Kokams aren't out yet.

Notice there are a couple different shape batteries in the 1250 mah size. I think this would work.

http://www2.towerhobbies.com/cgi-bin...?&I=LXNYJ4&P=0

This battery is short enough to fit in the Axe and under the plastic canopy. It also has a balance port which you will want to utilize. Keep these lipo's balanced with a balancer so they don't overheat during charge and catch fire. Its also 15C . This means it puts out 15 times the rated capacity (15 x 1250 = 18.75 amps output) more than enough to run your Axe.

The 800 mah 10 C would only put out 8 amps which is close to what this heli draws. Could lead to hot batteries and short life of batteries. Will also result in short flight times with this low capacity (800mah).

But, I went with the ThunderPower 1320's.

RE: lipoly
 

Thanks for the info
The price is right and I found out that by changing
wires on the four prong plug will fit my e-flite 2-3 cell charger & balacer

RE: lipoly
 

Sounds like the ticket. ;)