upgraded servos for axe cp?
 

Do the hitec hs-55/56 servos help with stability when hovering on the axe cp? I heard that I should replace the servos I have now with those. I am wondering what else would be a good upgrade for more stability? I already have those 1/16 wheel collars on the flybar but not sure of what else to do.

RE: upgraded servos for axe cp?
 

Most of my slop in the collective seems to be in the gear train in the stock servos - I can move the arm a couple of degrees without moving the servo motor. Anytime you can get rid of the slop you will fly better, no matter what kind of flying machine!

RE: upgraded servos for axe cp?
 

I'm with you there, I can move my servo arms a little before you feel the resistance of the motor. The collars help but unless your servos are really bad I wouldn't bother. Your control style probably won't change all that much for this lil heli. I think it is still going to require constant input on your part to keep it where you want it. When I first started flying it I felt the same way, like there has to be something that can be done. I added the wheel collars and think that helped a bit but once you get on top of it if your servos are ok I wouldn't replace em. Unless of course maybe you had them lying around or were planning on using them in another heli down the road.

Just my opinion