Freya Blade Grips
 

I have a Hirobo Eagle Freya SST I bought used. It's probably about a 2004 model I'm guessing. Anyway, I've been flying it for about seven months and I decided that it was time for a face lift. So, I'm upgrading the servos and the gyro and putting a governor on it. I'm going to change it from HPM to SWM as well. Additionally, it had already been upgraded to a metal hub and I would like to buy metal blade grips also. I'm getting conflicting information, however, as to what the proper part number is to order. It looks like the correct one is 0414-226. Anyone know for sure for this vintage of Freya?

RE: Freya Blade Grips
 

IF the blade grips have the pivot ball on the trailing edge of the blade, it is an original design Freya, not an Evo and the metal blade grip number you have is correct. You will also need to get the 0414-227 pitch arm as well. You will need to buy two each of the blade grips and pitch arms as they are sold individually.

If you have any other questions, feel free to ask.

Jeff
MRC

RE: Freya Blade Grips
 

Thanks Jeff - I appreciate it.